rgh not booting

[XL3THAL VIP3RX]

my RGH has been running fine,ive brought it to work this morning plugged it in,and it dnt start up.
the centre light cums on and the CR light is on,but tghe fans dnt cum on and the power brick light stays orange.
any help will do thanks.

ps,,checked soldering and its all fine

 

[esbmaepo]

my RGH has been running fine,ive brought it to work this morning plugged it in,and it dnt start up.
the centre light cums on and the CR light is on,but tghe fans dnt cum on and the power brick light stays orange.
any help will do thanks.

ps,,checked soldering and its all fine

Could be a damaged STBY_CLK point. What console is it?

 

[Martin C]

Was it working before you travelled? If so, something's been dislodged.

"ps,,checked soldering and its all fine"

pics please.

 

[XL3THAL VIP3RX]

its a falcon board,and yes it workd before i moved it.
i removed the wires and all the pads and points are intact.but when you press power button it lights up but the fans dont start

 

[esbmaepo]

Can you still read nand?

 

[XL3THAL VIP3RX]

pics

 

[XL3THAL VIP3RX]

Can you still read nand?

havnt tried but i shud be able to as theres still power to board for the CR and ROL.

only time ive had problem is like this is when ive lifted the pad were orange wire goes and then it dint power on.but on this one all the pads are intact, and the xbox dont power on even with the wires removed it just does the same

 

[esbmaepo]

havnt tried but i shud be able to as theres still power to board for the CR and ROL.

Just proves that there is power to board. On your pics STBY_CLK wire is not connected?

 

[Martin C]

Soldering is most definitely not 'fine'. Always strikes me as curious as to what people perceive as 'fine'. Badly soldering multi-strand wire so you have stray strands is just asking for trouble. I do like how you removed your soldering for CPU_PLL_BYPASS (and even then took out of focus images) before taking pics.

Problem is you've shorted something due to very poor soldering.

I suggest sending it to someone for repair.

 

[XL3THAL VIP3RX]

Was it working before you travelled? If so, something's been dislodged.

"ps,,checked soldering and its all fine"

pics please.

could it be power pack martin??im askin because ive just plugged it in my friends xbox and it gets 3 red lights and the fans,and ive just put a proper ROL on mine and it comes up with 3 red lights and the fans dnt run

 

[Martin C]

What about secondary error codes?

 

[H3rmaN]

Why not try your friends PSU on your console? What is the secondary error code your friend gets on their console with your PSU? Faulty PSU tends to be 0001.

 

[XL3THAL VIP3RX]

Soldering is most definitely not 'fine'. Always strikes me as curious as to what people perceive as 'fine'. Badly soldering multi-strand wire so you have stray strands is just asking for trouble. I do like how you removed your soldering for CPU_PLL_BYPASS (and even then took out of focus images) before taking pics.

Problem is you've shorted something due to very poor soldering.

I suggest sending it to someone for repair.

ive got 2 others and they are running sweet.
i removed the wires wile i was at work so i could take pic with my phone thats why one is blured...its not a conspirisy ya know

---------- Post added at 13:39 ---------- Previous post was at 13:36 ----------

What about secondary error codes?

4441

---------- Post added at 13:43 ---------- Previous post was at 13:39 ----------

What about secondary error codes?

secondry error is 4441-0001

ive just put my power brick on mi mates agen and it works,his wnt fit mine cos it jasper

 

[Martin C]

So if yours PSU works on his Xbox, then obviously your PSU is working.

So try it again on yours.

"i removed the wires wile i was at work so i could take pic with my phone thats why one is blured...its not a conspirisy ya know"

You're missing the point. Taking a pic of everything removed is pointless. You've actually removed all evidence of what was actually wrong so locating what part you may have shorted is now nigh on impossible.

 

[XL3THAL VIP3RX]

So if yours PSU works on his Xbox, then obviously your PSU is working.

So try it again on yours.

"i removed the wires wile i was at work so i could take pic with my phone thats why one is blured...its not a conspirisy ya know"

You're missing the point. Taking a pic of everything removed is pointless. You've actually removed all evidence of what was actually wrong so locating what part you may have shorted is now nigh on impossible.

i know what ya mean mate,ive tried it agen on mine n it still dont work.
when i get home i can re-solder the wires and take sum better pics.

ive done a few installs ,ive had the odd problem witch ive sorted but never this.

i was only playing on it last night thats what i dont get.

 

[Martin C]

If it's not booting with the wires removed, resoldering isn't going to cure it.

 

[XL3THAL VIP3RX]

If it's not booting with the wires removed, resoldering isn't going to cure it.

ive got multi meter is there anything i can do to try and find the problem?

 

[Martin C]

So what happens now when you plug it in?

 

[XL3THAL VIP3RX]

So what happens now when you plug it in?

im back home na mate.
what do you sugest i try first?

 

[H3rmaN]

im back home na mate.
what do you sugest i try first?

You didn't answer the question, what happens now when you plug it in? Does it turn on and give RRoD, nothing at all, fans kick in but nothing on screen, etc, etc??

First thing I would do is check and double check for shorts around the RGH & NAND-x solder points.