RGH-obtained keys-need help

[Buljo]

Ticcalion im trying...i cannot inject that obtained key via jungleflasher....i put it manually....when im trying to write i got authorization and parse failed...if i try to read that drive again...i got stock firmware from "target firmware"...it seems that manually injectin key doesnt work...i was having few fat consoles before and did that without a problem...what to do?

 

[BL4K3Y]

As said above, if your drive is a 9504, you can give LizFix a try.

Failing that, you can either sit back and wait for a solution or proceed to glitch the console and write a modified image to it.

 

[Buljo]

BL4k3Y drive is 9504 i have few consoles without keys and i have obtained keys but it is a question if a drives that came with that consoles are original 1 or mismatched....so lizfix will no help....BL4k3Y zou think that there will be some solution in next Jungleflasher or some other program?

 

[BL4K3Y]

Load the cpu key and nand into Jrunner, it will show what the OSIG is and the dvd key is for that console, whatever the dvd key shown there is, is what you will need to inject into the dvd drive in order for it to work with that console.

This ^^ - all you need is your CPU key and a valid NAND dump to check this information in J-Runner or 360 Flash Dump Tool, this will tell you which drive the console *should* have and will determine if you can use LizFix or not.

BL4k3Y zou think that there will be some solution in next Jungleflasher or some other program?

I don't develop JungleFlasher nor am I affiliated with it in any way, I merely try and help out around the forum so I couldn't possibly tell you what will be added in the next version.

 

[Buljo]

Yes sorry....i didnt see anything because im tired with that console...i see OSIG...i will first drink coffe and 1 smoke...then i will try again....sorry ...i didnt saw anything i was to tired.

 

[Oggy]

sounds like you are using the bugged jf, prior to 182 but I forget when exactly it was fixed.

that would explain the 00 key.

auth will fail with that too.

not to mention, lizfix instructs you to write a fw that shouldn't auth but no one listens when I tell them.

 

[Buljo]

Its alive!

---------- Post added at 03:54 ---------- Previous post was at 03:53 ----------

Thank you all.....

 

[Ticallion]

Can you explain exactly what you ended up doing for others who might have the same problem.

@Oggy, is that a failed authorisation that will still work... or should it not work at all?

 

[Buljo]

Lizfix tutorial ...without writing cover,pcb,laser and hw version....

 

[Buljo]

because of update message after making new bin file with lizfix i put a 0272 original firmware and flashed dvd drive...no more message....everything is about update error message and you can use hex to decimal converter to find out at what update stucked...here it is Ixtreme forum explain--http://www.ixtreme.net/ixtreme-lt-lite-touch-firmware-slim-support/20435-update-status-code-xxxx-xxxx-xxxx-xxxx-c000-xxxx-fixing.html

 

[crono1000]

Glad to hear you sorted it out finally

Sent from my LG-P999 using Tapatalk 2