RGH Slim cpukey error

[Diddlesom]

Hi,
I have been using jtag tool v:4.25 and all has been going well,booted into xell reloaded and taken a photo of my cpu and dvd key.

Now when i go back to the 'Read your cpu key.' part of jtag tool i type in my cpu key and checked it was 32 digits then checked the key quite a few times and saved it as cpukey.txt

When i click step 5(check key) and select cpukey.txt i get:
Unhandled exception has occurred in yout application,the error is The process cannot access the file 'C:\Program files (x86)\JtagTool\Nand.bin'because the file is being used by another process.

I am a bit stuck now on what to do,i read that i had to edit the cpukey.txt and remove the text and only have the key in there so i did this but still getting this error.

I expect its something simple can anyone help me out with this please.

 

[Martin C]

"C:\Program files (x86)\JtagTool\Nand.bin'because the file is being used by another process"

You have a window open somewhere still with this in use. If not, then you'll need to restart JTAG Tool and reload the nand.bin you got and try again.

 

[Diddlesom]

Yea this is what i thought but i could see nothing using it,i restarted jtagtool and loaded the nand again but got the same results.
Rebooting the pc now...

 

[Martin C]

if all else fails, use multi_builder.

 

[Diddlesom]

ok now when i click 'check key' i get the error:

Index was out of range.Must be non-negative and less than the size of the collection.
Parameter name: start index

I clicked continue and then 'check key' again and i get the error:

\Nand.bin being used by another process again

I know its not open anywhere as its a fresh reboot

 

[Martin C]

so your CPU key is entered incorrectly.

 

[Diddlesom]

i have checked it and rechecked it i even booted xell again and took another photo of the cpu key and the fusesets.

I will check again

 

[GSIBOY]

Double check your CPU key and rather use Multibuilder, much easier

 

[Diddlesom]

checked cpu key again and its correct.
Downloaded multibuilder 0.7 and on the part where i have to select Image type im not sure what to select:
1 - Glitch Hack image
or
2 - Retail MS

Im thinking 1 but wanted to check

 

[frayed]

http://www.team-xecuter.com/forums/showthread.php?t=76193

 

[Martin C]

checked cpu key again and its correct.
Downloaded multibuilder 0.7 and on the part where i have to select Image type im not sure what to select:
1 - Glitch Hack image
or
2 - Retail MS

Im thinking 1 but wanted to check

Are you trying to glitch the console or create a retail NAND? I'm sure you can answer this yourself.

 

[Diddlesom]

Thankyou for all of your help with this,jtagtool was not working for me this time.

All working fine now,console boots fairly quick too.

Now i just need to find out what i can do with it lol i have a RGH slim and no idea where to go next but it has been fun doing it.

 

[legitmod]

Just a question why are you RGH'ing an console an don't know what to do with it why didn't you do a lil research before you decided you wanted to Reset Glitch your console just curious :facepalm:

 

[Diddlesom]

its a good question,i got this slim faulty and found that the PCB board was faulty so was unable to read the key from it.
I now have the key after reading the nand and thought i just aswell RGH it while i was about it.
This is not my main console i use.
I have about 30 various 360 units here with errors of some kind,i get them passed onto me from a local electronics shop.

My next question is can i spoof any drive to put in this slim ? even a phat dvd drive ?

 

[Diddlesom]

Now i have searched high and low on this subject,when i built my image with multibuilder i selected:
Build image with Dashlaunch v2.27/default launch.ini
BUT_A = Hdd:\FSD\default.xex
Default = Usb:\FSD\default.xex

when i boot the console it goes into the 14699 MS dashboard,should it not boot into FSD or Dashlaunch ?
Or do i need to put FSD onto the root of a usb or hdd for this to work ?

I have been trying to run xexmenu from a usb via demos but cant seem to do this either

 

[x360ccm]

Default is usb put fsd on the root of usb.

if Default is hdd then you install fsd on root of hdd

put the C0DE9999 from xexmenu into Content\0000000000000000\ folder

 

[Diddlesom]

oh dear i get E71 error when i put FSD onto root of usb

 

[Martin C]

All you're doing here is posting the result of what you've done. We're not interested in the result as much as WHAT you actually did.

 

[Diddlesom]

All you're doing here is posting the result of what you've done. We're not interested in the result as much as WHAT you actually did.

I put FSD 2.2 onto the root of a usb stick and it looked like:

Docs
Media
Plugins
Skins
default.xex
nxeart

I put this into my console and it gives me E71

Sorry if i come across as stupid but i am kinda new to this

 

[x360ccm]

i take it that all them are in a folder named freestyle:biggrin:

check [URL="http://www.teamfsd.com"]fsd ![/URL] :rolleyes2:

you boot a console with a usb stick in and you have a default.xex on the root of it.then you will get that error.