RGH rgh slim trinity no glitch, back to stock

C

consoleservice

Full Member
Feb 13, 2011
32
0
hello

i have xecuter cool runner used to recover a dvd key, from bad kamikaze. i've done xell, i saw cpu & dvd key. but now i want to use o original dash. i write back original nand dump , but i got e79 error. any clue to write back original nand w/o error?
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
it means you didn't get a proper write back to the NAND.

Reconnect the coolrunner and flash ecc back with +w16.

Boot to Xell and use rawflash to put your NAND back on.
 
A

abyss

VIP Member
Dec 16, 2010
187
0
Belgium
you got your dvd key from keyvault right? :p you didn't combine those fusets wrong or anything?

greetings
 
F

fersy

VIP Member
Dec 9, 2010
523
0
As martin has said above it sounds like your nand didnt write back properly. It used to happen me a lot when i used lpt cable, not once since nand x. But u can flash it back from xell as said above and that will remove the liklihood of a bad nand write.
 
C

consoleservice

Full Member
Feb 13, 2011
32
0
abyss said:
you got your dvd key from keyvault right? :p you didn't combine those fusets wrong or anything?

greetings
Click to expand...
no, the dvd key was from xell boot. i didn't combine any fuse.

---------- Post added at 02:36 ---------- Previous post was at 02:34 ----------
fersy said:
As martin has said above it sounds like your nand didnt write back properly. It used to happen me a lot when i used lpt cable, not once since nand x. But u can flash it back from xell as said above and that will remove the liklihood of a bad nand write.
Click to expand...
i never used lpt cable, i use just nand x. and yes was flashed fron xell and console is full work.

thansk for all

best regards
 
You must log in or register to reply here.