RGH RGH sucessfully 3 trinity mobo and cant extract FCRT/C-R.bin and KEY.bin

[gojo84]

hello there this is kind of very interesting issue , after RGH my first one every thing gone well extracted all files needed the other two don"t extract the C-R.bin and key.bin
which are needed for the LTU2 board process
The first one was on 16474 and the other were on 14717 so I have two questions
1 Have I done anything wrong during the RGH ?
2 IS there any possibility to get those file or convert dvdkey txt into bin file cause I tried and retried and nothing

 

[oO Elite Oo]

Please fulfill support template in order this thread to be successful.

 

[gojo84]

I think there's all the info I can provide for this case, said the dash version of the motherboards ,said they are trinity and they are running perfectly now on stock nand as they were before the rgh process
and got saved all their original files data
RGH them with slim proto v2 and j programmer v2
What else should I provide and I will provide

 

[GeekHeat]

I think there's all the info I can provide for this case, said the dash version of the motherboards ,said they are trinity and they are running perfectly now on stock nand as they were before the rgh process
and got saved all their original files data
RGH them with slim proto v2 and j programmer v2
What else should I provide and I will provide

if u want any help u need to fill the template out like Elite said.
http://team-xecuter.com/forums/showthread.php?t=96474

 

[gojo84]

ok then
TX Product(s) used: Slim Proto v2 ,JR v2
Console Type: Trinity.
NAND size: 16mb
Dashboard version: 16747 1st one and 14717 the two others
CB version: 9231
Glitch timings were excellent and after read 4 nands for each check up for bad blocks , none of them have bad blocks

 

[gojo84]

so from my 3hours research the are two post where other users were in the same prob and stefanounick created c-r.bin and key.bin for this guy
the point is that I'd prefer to learn how to do it better to ask to do it for me cause there will be other times with this issue occurs to me again
Thank for your replies in advance

 

[dogsfoot]

Load your Nand dump into Jrunner and click on the "Tools" tab up the top
Click "Extract files" and all your file should be in your working folder.

Easy....

 

[gojo84]

is here that I'm stuck and this is the log
Initializing nanddump1.bin..
Trinity
Nand Initialization Finished
Extracting..
Saving SMC_en.bin
Saving SMC_dec.bin
Saving KV_en.bin
Saving KV_dec.bin
Saving smc_config.bin
Working...
Failed to find fcrt.bin

 

[nofeloniesyet]

is here that I'm stuck and this is the log
Initializing nanddump1.bin..
Trinity
Nand Initialization Finished
Extracting..
Saving SMC_en.bin
Saving SMC_dec.bin
Saving KV_en.bin
Saving KV_dec.bin
Saving smc_config.bin
Working...
Failed to find fcrt.bin

both boards have 9504/0272 drives im assuming?

 

[gojo84]

yes both of them
Another thing that is curiously happening is that the key.bin extracted from the nand dump ,that is supposed to be dvdkey cant be used in the setting in Jungle flasher in MANUAL SPOOFING but the original dvdkey extracted from dvd of the console can so I've tested it in many other boards like 0401.1071 0272 and all these boards work properly in the console with the original key.bin injected and with the key.bin extracted from RGH process they even dont pass the Authorise and Verification and when i load the CFW with this key injected it has a blank sector key ,just only FFFFFFFFFFFFFF.... so

 

[AllyNerd]

http://team-xecuter.com/forums/showthread.php?t=141602

not a direct answer but...

 

[gojo84]

the key.bin extracted from nand is only for LTU bord ?