RGH Supported dashboards?

[hoggin222]

Hello everyone. First off thanks for all the help and I recently had a successful rgh falcon. Easy thanks to this forum. I have a couple more boards I'm doin this weekend but the dashboard is not listed on jtag tool. It's the 2.0.8955.0. I believe. It seems jtag tool skips this dash. I seen on the download tab a list of ms updates. Can I download a rgh compatible update and just flash it to NAND before I install rgh and the whole normal process. Thanks for all the help guys.

Just a tip- when soldering the NAND X wires directly use the bottom of the board. It takes me 10 minutes to normal install on top and 3 mins on bottom. Just a tip guys.

 

[hoggin222]

The RGH does not depend on the current dashboard version. As long as you have a compatible CB on your zephyr/falcon/jasper then you will be able to RGH it. The dashboards JTAG tool lists are the dash versions that you will RGH to. For example, if you select 14699 in jtag tool, your 8955 console will be updated to RGH 14699


Sent from my iPhone 4S using Tapatalk

My jtag tool doesn't have 14699. When I go in advance mode and click reset glitch it shows me 13604 and 13599. Did I miss an update for jtag tool? It says I'm on 4.25. Thanks for the info man.

 

[talby71]

My jtag tool doesn't have 14699. When I go in advance mode and click reset glitch it shows me 13604 and 13599. Did I miss an update for jtag tool? It says I'm on 4.25. Thanks for the info man.

no you haven't missed an update
hasn't been updated for 14699 yet, must be on holidays

 

[hoggin222]

Ok I just got confused. I'm guessing he used the new dash as an example. So when I open jtag tool and it ask me which dash- I should choose 13604 and it will update it for me? Sorry for the noob questions. Thanks guys for clearing this up.

 

[Martin C]

Just use multi builder 0.7. It'll take you 10 mins to dump the NAND and get the CPU key then make an RGH for it with the new dash.

 

[jeremy790]

I'm sorry but I understand jtag tools is VERY easy but like Martin said just use multibuilder. Jtag tool has to many problems so take the time and do it the long way and save yourself some headaches.

 

[hoggin222]

Well I like simple and it has worked for me recently. Please just tell me this answer. When it gets to "create freeboot image" step 1 (dash to install) - should I just pick 13604 even though this isn't my dash. That's the last question guys. Thanks again

 

[Fisticuffs]

Yes, Just save a copy of your original nand somewhere just in case, And update to the latest dash if you want and listen to Martin, Also DARKFiB3R's Guide is easy to follow.
Edit: I played around with jtag tool a bit, When I loaded my nand it would auto select my xbox as a jasper 256 when its a 512, And it showed my dash as 13599 when it was 13604, Multi_Builder v0.7 is very easy and accurate

 

[hoggin222]

I'll give multi a try. Thanks guys. I'm new to the whole thing and y'all were gental lol. I'll search and find a good tut on it. Sounds like it's the best if every person recommends. Thanks again

 

[talby71]

jtag tool hasn't been updated to 14699 dash yet either

 

[Fisticuffs]

@ hoggin222, Click on darkfiber's name in my post it'll take you to his tut

 

[MackTK]

jtag tool hasn't been updated to 14699 dash yet either

Not enterily true. The JTAG Tool from the official site has 14699 support. Just follow this link, and download the reset glitch package, not the advanced package.