I haven't done a Xbox 360 in a long time. I do ps3s all the time and not to many Xbox systems. As you can see the dash is 15574. I got the nand all dumped with the nand x. That all looks good. I got the cr3 installed, I think flashed correctly. I just hit flash and then picked rgh2 and trinity. Flash. Now to the question. Is it the same as before. Create ecc, write ecc, get cpu key. But I read somewhere about new ecc files. Does j-runner download those by itself. Then make an image and then write image. I got j-runner 3.7 all updated. Thanks all.
GENERAL Rgh trinity slim 15574
- Thread starter racer0018
- Start date
GeekHeat
VIP Member
Yes j runner will be up to date,so just do what u said.
Obviously u will need to program the cr3 with trinity timing file.
Obviously u will need to program the cr3 with trinity timing file.
Yep I got that. I'll just search for some good settings for the cr3 lite. Thanks for the help.
Okay another question, do you have to glitch the cpu with the cr3lite to get the cpu key after you write the ecc to it. Thanks.
im having a heck of a time getting it to glitch with the cr3 lite. Tried about all settings posted on the net. Standard wires that came with the cr3 lite. Anyone got any tricks. Thanks.
i got it to work. Took some messing around with the cr3 but it works. Still got like 45 secs glitch time. I liked to shorten that. Looks like I got some playing around to do. What is the latest dash to put on these. Thanks.
In a side note I did find a bad resistor on the board. Teaches me to let someone bring their own coolrunner and not one that I would order. I also think that it's a clone cr3 lite! How can you tell, so I can tell him? Thanks all.
Kexxen
VIP Member
- May 26, 2014
- 174
- 23
This is a fake cr3 lite http://s16.postimg.org/oz86tz085/20121010_073640.jpg
The latest dash is 17349, currently.
The latest dash is 17349, currently.
nofeloniesyet
VIP Member
most cloned cr3 lites you will find these days also do not have cr printed on the large ic,and it will say xillinx on it instead.
The link with the picture of the cr3 looks the exact same as the one he has got. I think it's a clone. I'm sure it's a rhetorical question, but does a clone not glitch as good as a real one?
I see that you do reballs. I also do them. What unit is yours. i have two units. Achi ir-pro sc and a jovy re-8500. I started with the achi but updated the jovy. Thanks.
nofeloniesyet
VIP Member
atm i run a heavily updated and modified scotle ir pro sc v4 with elstein plates all around. jovy come stock with elstein plates,which is probably why (im sure) you have found it easier to work on the jovy. the achi is crap man,mine didnt last long at all. but ironically all the scotle i have now is a higher quality achi pro sc v3.
Last edited:
Yes this cr3 clone is crap. I was going to mess with it today for a while to find some good settings and it won't even glitch now. Junk, I'm sure there is another resistor bad or something else. Since the cr3 lite is discontinue, is there a place I can look at a schematic, plans, exploited views, anything to see resistor specs, fuses, traces and so on to see what else could be wrong with this damn thing. Thanks.
Forget about the last post, I called the guy and told him that I'm sick of working with this clone. I told him that I'll try to get it working but if he wants something that will boot at better times he just needs me to get a real one and let's get rid of the clone. He agreed and I'm ordering a rev c for it. Thanks all.
nofeloniesyet
VIP Member
rev c is going to be just as hard to find as a legit cr3 lite,seeing it was discontinued too.better off with a cr4.
Oh my this clone is junk. Who makes them. anyway it is clutching but the green light isn't going on. What a POS. I'm done messing with it into I get the other one in the mail. Thanks.
Hi,
cpl off questions.
1) do I need to download freestyle dash still with the cr4 or does the jrprogrammer do that? I am confused on what I need to do after I've done everything on jrunner and what I still need to download to get modding. This is my first rgh I've done and to put it bluntly I'm sh*t at computer work so any help would be great.
2) should I have a constant green light on the cr4, I thought it should flash but again it's my first and I'm assuming that it should flash every 5 or so seconds..
cpl off questions.
1) do I need to download freestyle dash still with the cr4 or does the jrprogrammer do that? I am confused on what I need to do after I've done everything on jrunner and what I still need to download to get modding. This is my first rgh I've done and to put it bluntly I'm sh*t at computer work so any help would be great.
2) should I have a constant green light on the cr4, I thought it should flash but again it's my first and I'm assuming that it should flash every 5 or so seconds..