ANSWERED RGH trinity with 16D5S

B

bruno_rv

VIP Member
Jun 8, 2010
181
0
Croatia
I succesfully RGH-ed my slim trinity with 16D5S,booting to MS dash 14699 or to xell with eject button. Assuming it is ok.
How can i install FSD now? Do i need xexmenu? How can i install it,i read it can be done through burned iso but my 16D5S doesnt read it in MS dash. Any other way to install it? Tried through USB but unsuccesfull. I tried to extract FSD installer to usb stick,but when i boot the box with the usb flash (fat32) i get Error E71. Tried formatting but the same thing.

Sorry for so many questions,but this 16D5S is giving me a headache :D
 
M

mafia 5k

Senior Member
Oct 27, 2010
145
0
Massachusetts,USA
do you have a usb if so get USB xstaf Xplorer..

configure usb to xbox

back to pc open device dump the c0de9999 folder in content/0000000000000000/code9999

it should pop up then install it to hdd from xex menu
 
B

bruno_rv

VIP Member
Jun 8, 2010
181
0
Croatia
I tried that. I get error E71 on the screen.

---------- Post added at 05:34 ---------- Previous post was at 05:34 ----------

Forgot to say. I dont have a HDD inside, its a 4gb slim.

---------- Post added at 05:35 ---------- Previous post was at 05:34 ----------

I dont have XEX menu nowhere.
 
B

bruno_rv

VIP Member
Jun 8, 2010
181
0
Croatia
Sorry ,mi told you wrong,i get E71 when i put FSD 2.2 installer on USB,when i inject that folder,nothing happens,it boots into dash and thats it. Nothing there,games folder and any other folder is blank.
Nand made with multibuilder,default launcher.ini with patches,flashed with rawflash v4. Backup original nand checked with nand healer and nand tool before started to make any modded dump.
 
V

viper0831

Full Member
Aug 19, 2009
63
0
Make sure your launch.ini has this line: Default = Usb:\Freestyle\FreestyleDash.xex

Make sure your flash drive is formatted as fat32 and set the fsd up to match the path above.
 
  • Like
Reactions: bruno_rv
B

bruno_rv

VIP Member
Jun 8, 2010
181
0
Croatia
Ok. I figured it out. I needed to extract only FSD folder from installer,not the whole package that Ubergeek posted. Now it opens fsd when usb flash inserted.
I have another question. Any operation with onboard MU doesnt work? I tried copying the whole fsd folder to internal MU but i get "copy failed " in the middle of the progress. Any chance to get in to work withou usb stick? I know i have to change my default.ini settings but how to copy fsd to internal. I have dashlunch 2.27 that comes with multibuilder,maybe need to upgrade to newer one?

---------- Post added at 14:51 ---------- Previous post was at 14:50 ----------

BTW, Thank you all for your time for answering :)
 
You must log in or register to reply here.