so i installed everything. heres the order i did it. installed nandx and read nand. its a zpher so i read it like 6 times. every read was matching. i then programmed coolrunner with nandx and jtag tool. evrything worked fine and i installed coolrunner. made sure all switches were set properly and rechecked all solder points. evrything is still good at this point. plugged in power to xbox to make sure chip was glitching and it was. i then went back to jtag tool and wrote xell. back to tv and nothing. chip lights up and trys to glitch but no success. i jumped on here and did some research. checked all points again and all good. plugged in normal av cables instead of hd and used eject to boot. still nothin so i powered on with the actual power button. finally xell and i grab my keys. back to jtag tool and finished up the process. said everything went well with no errors. plug into tv and get 0022rrod. back to forums and did more searching. i let the console sit for about an hour.hit the power and lights on rof and coolrunner are on. but now the coolrunner seems to not be glitching and it didnt give me the 0022 error again. i checked all wires for the 100th time and they are fine. all went bad when i installed freeboot or whatever the last step was. now its just sitting. any ideas and i know my grammer is bad but im sure you understand. thanks for the help guys. also on one of the boot attempts my whole rof went green and kept flashing real fast. only did that once.
rgh wierd problems...help
- Thread starter hoggin222
- Start date
I honestly think I picked the wrong motherboard. I have a falcon in the closet. I'm seeing this all over the forums now. I dnt know how to upload photos and figured my wireing was good and looked good since it booted xell. I think I need to make a photo bucket account for the pics so I will try to get some decent shots. But honestly should I just try the falcon and leave this sitting?
RROD!
VIP Member
- Apr 13, 2011
- 786
- 0
No leave the other Xbox alone work on getting this one going because in the end you will be happyer the last thing you want is two Xboxs going crap on you but anyway back to your problem is JTAG tool the only app you tried to use also have you tried to write the original NAND back ?what dash are you on?and please try to post some nice clear pics as you never know there maybe something you missed As from the error code is one that is implying a bridged joint or broken trace so pics would be good