RGH2 Install JASPER 16MB won't BOOT XELL I'm USING TEAM XECUTER STUFF THIS TIME

[Musicislife133]

So my Rev C got here a few day's ago and i had a Jasper 16MB got the nand read 2 bad blocks they were remapped in J runner i'm using the JRV2 now that it seem's to wanna work so i did the wire install bridged 1 and 2 along with JP on the cool runner programmed the timing file onto the cool runner and booted the xbox Surprisingly i didn't burn out the motherboard as it still boot's i've already Wrote the ECC No error's what so ever was happy about that cause i used to get errors so everything's done now but i can't get my CPU Key to save a beeping life sadly all it does it show's up red in the cool runner( i have it switched to phat and Norm) the fans spin blinking green light(dvd drive isn't plugged in i know that) i did post before cause i had used a rev D and a ****** and didn't get any help really cause of that but i got my rev C the day after and a Jasper 16MB xbox elite black basically instead of blabbing on and on and on about that basically all i'm asking what the duck am i doing wrong cause i'm legit basically done i just need the CPU key and it won't boot into Xell even though it wrote it fine someone PLEASE HELP ME YES I"LL POST PICS PS i know the pic's aren't the best trying to get a real close up for you guy's with my 4X Magnifying glass thank's for anyone that'll read and help or even read thank you
http://www.mediafire.com/view/28q9183c9iu8qri/IMG_0843.JPG
http://www.mediafire.com/view/8b0rjm7tvvibjem/IMG_0840.JPG
http://www.mediafire.com/view/j935ig4wxy39ucf/IMG_0847.JPG
http://www.mediafire.com/view/xar7ha2osb5kukc/IMG_0841.JPG
http://www.mediafire.com/view/8n3xd4p30nc33jm/IMG_0842.JPG
http://www.mediafire.com/view/jllioia8lzxod1o/IMG_0845.JPG

- - - Updated - - -

m a t r i x ' s is a bad word?

 

[ultimate360]

Well for starters, i'm 97% sure that coolrunner is still a clone judging by the corners, print quality, switch color, stripped end length of wires, and lack of easily visable logo on the IC.

Second of all, if you look at your coolrunner, you have a large solder splash that is shorting out several pins on the IC, which won't exactly be working in your favor

 

[Musicislife133]

okay are you talking about where CAP is sorry about the clone it's hard to find legit's even on the where to buy cause apparently some of those sites sell clones

 

[Musicislife133]

Okay so i'm basically done with this Hack as i've never been able to get any farther on the install other than Writing the ECC on any consoles hell i'm lucky enough to even get the nand reed i wanna do this f u c k ing glitch right but not sure where to go or what to do anymore as every attempt i try end's in a fail so i'm putting respect where respect is due prop's to the guy's that FOUND/CREATED the RGH method's JTAG's etc and prop's to all the people who can actually DO THE GLITCH/HACK i've only been able to flash a dvd drive when it come's to modding basically what i'm saying is say if i buy a RROD console reflow it fix it etc get a Cool runner Rev C or CR3 or lite or CR4XL chip what install should i do and what install would be the less likely one where i'd f u cked up if someone could recomend me i really wanna do a RGH1.2 as it's easy and such but i tried it never got it boot in Xell some guy who i bought a slim RGH off of said to switch the wiring to a RGH2 install which i did still No XELL i unbridged Jp and bridged CAP and 1-2 as shown in the pic's it's simple as i've Never been able to get it to BOOT in to Xell so i can get the cpu key it's sad cause there's like only 2-3 STEPS after that so what should i try and is there anyone that could like help me when i'm doing install make sure i'm doing it right so i don't go through another motherboard cause i'm sure as you can tell i'm frustrated and annoyed with my self over this RGH1.2 or RGH2 or R JTAGED which should i do

 

[Oggy]

okay are you talking about where CAP is sorry about the clone it's hard to find legit's even on the where to buy cause apparently some of those sites sell clones

You must really think we're idiots.