LITEON DG-16D2S ripped pcb board

[Noob20**]

I ripped off the pad to the pcb board no i need to solder to a different point before the pad ripped off. The 3Rd point from the left was torn off and the disk tray reads open now.

 

[keil423]

Not enough info for us to help.

Please post pictures of the damaged area.

 

[Noob20**]

The third pad from the left is missing.

 

[Noob20**]

:eek2:

 

[Noob20**]

I need new points to solder to because I ripped the third pad white off.

 

[chase]

what am I looking at ?? all I see is a blur

 

[Noob20**]

The pads where the wires connect the yywwrb area is damaged. The third pad has been ripped off. Its the first white pad in the row. My pictures are a little blurry. Are there alternative soldering points for connecting the first white wire. The tray reads open now.

 

[Noob20**]

 

[Noob20**]

Can you see the missing pad? YYWMISSINGWRB

- - - Updated - - -

The third pad is torn off.

 

[jligg]

Give me a sec ill get out the meter and find ya something

 

[Noob20**]

 

[Noob20**]

The gold portion was ripped off. The contact pad is missing. I posted my picture but its hard to see it.

 

[Noob20**]

The disk tray reads open how do i resolder it from a diffetent contact point to fix the problem?

 

[jligg]

here ya go..theres a via right behind the pad and then it goes to the bottom of pcb...any of these points should work fine

 

[Noob20**]

 

[jligg]

Why do you keep posting them images. I just gave you instructions on how to fix it. Please stop reposting your blurry images

 

[jligg]

And for future reference, when you want to take closeup pictures without them being blurry set your camera focus mode to macro.