Team-Xecuter Community
Console Type: Falcon
NAND size: 16
Dashboard version: 16202
CB version: 5774
J-Runner log:
RATER Output:
Description of problem:
Various different settings all yielding the same result. I have done a few RJTAG chips in the past on jasper motherboards with no problems at all. The chip im currently working with i have tried on 2 different jasper consoles 512mb 16mb and this falcon, all previous consoles gave 1033, finally figured i would ask for some help. Stock NAND when flashed back works fine, hopefully you guys can shed some light.
Also resistance to ground on J2D2.2 and J2D2.1 is right at 1.5k on both.
I also have the cpukey from a failed rgh 2 that i did where the console only booted twice.
Was the console working before you started: Yes
NAND size: 16
Dashboard version: 16202
CB version: 5774
J-Runner log:
Code:
Monday, February 17, 2014 8:29:49 AM
J-Runner v0.3 Beta (4) Started
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
R-Jtag Selected
Aud_Clamp Selected
Extracting..
Saving SMC_en.bin
Saving SMC_dec.bin
Saving KV_en.bin
Saving KV_dec.bin
Saving smc_config.bin
Finished
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully falcon_hack_aud_clamp.bin
Version: 03
Flash Config: 0x00000000
Can not Continue
Version: 03
Flash Config: 0x01198010
Writing Nand
falcon_hack_aud_clamp.bin
Done!
in 0:09 min:sec
Load Files Initiliazation Finished
Clean SMC detected
Patching Jasper version 2.3 SMC at offset 0x12BA
16547
Started Creation of the 16547 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.11.647
---------------------------------------------------------------
base path changed to D:\Files\Xbox 360\Software\J-Runner v02 Beta (288) Core Pack\xeBuild
---- { Image Build Mode } ----
building jtag image
******* WARNING: could not patch SMC reset limit!
---------------------------------------------------------------
D:\Files\Xbox 360\Software\J-Runner v02 Beta (288) Core Pack\142617774407\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16547.0
Console : Falcon
NAND size : 16MiB
Build : JTAG
Xell : power on console with console eject button
Serial : 142617774407
ConsoleId : 030011899843
MoboSerial: 8394571209677447
Mfg Date : 11/03/2007
CPU Key : 00000000000000000000000000000000000
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 00000000000000000000000000000000000
CF LDV : 11
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to D:\Files\Xbox 360\Software\J-Runner v02 Beta (288) Core Pack\142617774407
Image is Ready
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
Version: 03
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 2:00 min:sec
Aud_Clamp de-Selected
Load Files Initiliazation Finished
Hacked SMC detected
16547
Started Creation of the 16547 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.11.647
---------------------------------------------------------------
base path changed to D:\Files\Xbox 360\Software\J-Runner v02 Beta (288) Core Pack\xeBuild
---- { Image Build Mode } ----
building jtag image
******* WARNING: could not patch SMC reset limit!
---------------------------------------------------------------
D:\Files\Xbox 360\Software\J-Runner v02 Beta (288) Core Pack\142617774407\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16547.0
Console : Falcon
NAND size : 16MiB
Build : JTAG
Xell : power on console with console eject button
Serial : 142617774407
ConsoleId : 030011899843
MoboSerial: 8394571209677447
Mfg Date : 11/03/2007
CPU Key : 00000000000000000000000000000000000
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 0000000000000000000000000000000000
CF LDV : 11
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to D:\Files\Xbox 360\Software\J-Runner v02 Beta (288) Core Pack\142617774407
Image is Ready
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
Version: 03
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 2:00 min:secRATER Output:
Code:
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 04
Post 04
Post 09
Post 01
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 38 - SIG_VERIFY_4BL_CD
Post 39 - SHA_VERIFY_4BL_CD
Post 3A - BRANCH
Post 3B - PCI_INIT
Post 3C
Post 3D
Post 3E
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 3F
Post 3E
Post 31 - FETCH_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 3A - BRANCH
Post 40 - Entrypoint of CD reached
Post 42 - FETCH_HEADER
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 46 - RC4_INITIALIZE
Post 47 - RC4_DECRYPT
Post 48 - SHA_COMPUTE
Post 49 - SHA_VERIFY
Post 4B - LZX_EXPAND
Post 4E - FETCH_OFFSET_6BL_CF
Post 4F - VERIFY_OFFSET_6BL_CF
Post 71 - INIT_AUDIO_DRIVER
Post 70 - INIT_VIDEO_DRIVER
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init
Post 78 - INIT_STFS_DRIVER
Post 79 - LOAD_XAM
Post 7A
Post 71 - INIT_AUDIO_DRIVER
Post 73 - INIT_SATA_DRIVER
Post 74 - INIT_SHADOWBOOT
Post 75 - INIT_DUMP_SYSTEM
Post 76 - INIT_SYSTEM_ROOT
Post 77 - INIT_OTHER_DRIVERS
Post 78 - INIT_STFS_DRIVER
Post 79 - LOAD_XAM
Post 7A
Post 7B
Post 7C
Post 7D
Post 70 - INIT_VIDEO_DRIVER
Post 79 - LOAD_XAM
ShutdownVarious different settings all yielding the same result. I have done a few RJTAG chips in the past on jasper motherboards with no problems at all. The chip im currently working with i have tried on 2 different jasper consoles 512mb 16mb and this falcon, all previous consoles gave 1033, finally figured i would ask for some help. Stock NAND when flashed back works fine, hopefully you guys can shed some light.
Also resistance to ground on J2D2.2 and J2D2.1 is right at 1.5k on both.
I also have the cpukey from a failed rgh 2 that i did where the console only booted twice.
Was the console working before you started: Yes