RRod 0010 Falcon

Scrufdog

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
if I remove the rjtag power wire, and flash stock I can play games with no problem. There have been no other modifications to the xbox ever, except a flashed Dvd Rom. I'm the only person who has been inside the box. Granted, it's never had to have a reflow yet, but talking to my buddy, he just told me it RRoD'd on him once about 2 months ago when he left it on for a couple days straight. That, now, leads my back towards a needed reflow/reball. Before I started I checked the 2 points for 1.5K ohms and they both landed at 1.56K, so it's not those, so I suspect its somewhere else in the CPU thats loosing proper connection.

I also tried pressing down on the CPU, GPU, and SB, but that didnt help. He said he might end up getting a 250GB Slim soon for me to glitch out. That would be nice, since the CR3 Pro install I did on my Corona v1 was a cake walk. If he wants me to try a reflow on it, I'll report back here with the results.
 
Last edited:
Scrufdog

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
no problem. Will post back with results.
 
Scrufdog

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
Here ya go. Stock 16203 NAND, 3 cycles.

Code: 
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 18 - FETCH_CONTENTS 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 5B - INIT_KEYRING 
Post 5C - INIT_KEYS 
Post 5F 
Post 61 - INIT_HAL_PHASE_0 
Post 62 - INIT_PROCESS_OBJECTS 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6E - INIT_SETTINGS 
Post 6F - INIT_POWER_MODE 
Post 70 - INIT_VIDEO_DRIVER 
Post 71 - INIT_AUDIO_DRIVER 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 73 - INIT_SATA_DRIVER 
Post 75 - INIT_DUMP_SYSTEM 
Post 76 - INIT_SYSTEM_ROOT 
Post 77 - INIT_OTHER_DRIVERS 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Shutdown
Power Up
Waiting for POST to change
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 52 - BRANCH 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 5B - INIT_KEYRING 
Post 5C - INIT_KEYS 
Post 5F 
Post 60 - INIT_KERNEL 
Post 61 - INIT_HAL_PHASE_0 
Post 62 - INIT_PROCESS_OBJECTS 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6E - INIT_SETTINGS 
Post 6F - INIT_POWER_MODE 
Post 70 - INIT_VIDEO_DRIVER 
Post 71 - INIT_AUDIO_DRIVER 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 73 - INIT_SATA_DRIVER 
Post 75 - INIT_DUMP_SYSTEM 
Post 76 - INIT_SYSTEM_ROOT 
Post 77 - INIT_OTHER_DRIVERS 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Shutdown
Power Up
Waiting for POST to change
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 52 - BRANCH 
Post 12 - FSB_CONFIG_RX_STATE 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 52 - BRANCH 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 52 - BRANCH 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 5B - INIT_KEYRING 
Post 5C - INIT_KEYS 
Post 5E - INIT_SOC_INT_COMPLETE 
Post 5F 
Post 61 - INIT_HAL_PHASE_0 
Post 62 - INIT_PROCESS_OBJECTS 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6E - INIT_SETTINGS 
Post 6F - INIT_POWER_MODE 
Post 70 - INIT_VIDEO_DRIVER 
Post 71 - INIT_AUDIO_DRIVER 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 73 - INIT_SATA_DRIVER 
Post 75 - INIT_DUMP_SYSTEM 
Post 76 - INIT_SYSTEM_ROOT 
Post 77 - INIT_OTHER_DRIVERS 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Shutdown
 
RF1911

RF1911

VIP Member
Feb 2, 2011
157
0
Pause cannot be the same without F, thus your console is NOT slowing down. That's why you get A0. Please check E/F wiring and measure with multimeter. See if you can read 3v3.
 
Scrufdog

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
I can go over everything again tonight.

Is this something a double shielded cable might help? I have a CPU_RST Cleaner too.
 
Scrufdog

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
RF1911

RF1911

VIP Member
Feb 2, 2011
157
0
Sorry but there is no way to see if it slows down due to rater log been pretty slow on that pc. Try using POST MONITOR and start xbox manually.
 
Scrufdog

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
Well, never really considered it a slow computer. It's an i5 460M @ 2.53Ghz with 6GB RAM. I'll disable any CPU Throttling that might be on, set the Affinity for Jrunner to all Cores, and Set Process priority to High. I'll try another log after that.
 
Scrufdog

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
I replaced the D wire with kynar wire to the Alt point on top of the mobo. Using Monitor POST I can see a pause between 1D and 1E. Still not glitching on all 18 settings though.
 
Sp3kt3r

Sp3kt3r

Noob Account
Mar 3, 2006
4
1
Canada
Hi Scrufdog, have you found a way to boot your falcon. I'm doing one write now that giving me the same problem.
I have reviewed everything and can't seem to find why it doesn't work. that falcon never had a RROD as per my friend.
It boot fine without the 5.5v wire and retail nand.

that box was previously RGH with a CoolRunner V3 but boot time was slow so my friend decided to change for the R-JTAG.
I might open a new thread but since it was the same problem I was curious if you gave up on that box.

IF you found a fix let me know what you have done.
Thx
 
Scrufdog

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
never found a fix. returned to stock and gave it back
 
Sp3kt3r

Sp3kt3r

Noob Account
Mar 3, 2006
4
1
Canada
I managed to boot in xell and get cpu and create image and boot with modified nand but boot are very very slow.. I wil lprobably open a new thread for my issue but I seem to only be able to boot with 1.8v, DIPS 1,7 ON & AUD_CLAMP. If I use default voltage I get 90% of the time RROD. with 1.8 i'm ok but boot console boot only after 20 cyles.. and I tried switch 2-3-4-5-6 and it either doesn't boot or RROD.

I'm going to try without AUD_CLAMP and also TOP CPU_RST and worst case I'll try the old JTAG wiring without the QSB.
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Don't hijack someone else's thread. Start your own and complete the template.

Sp3kt3r said:
I managed to boot in xell and get cpu and create image and boot with modified nand but boot are very very slow.. I wil lprobably open a new thread for my issue but I seem to only be able to boot with 1.8v, DIPS 1,7 ON & AUD_CLAMP. If I use default voltage I get 90% of the time RROD. with 1.8 i'm ok but boot console boot only after 20 cyles.. and I tried switch 2-3-4-5-6 and it either doesn't boot or RROD.

I'm going to try without AUD_CLAMP and also TOP CPU_RST and worst case I'll try the old JTAG wiring without the QSB.
Click to expand...
Neither of these things affect boot time.
 
ZerOneX

ZerOneX

Full Member
Sep 20, 2011
56
8
@Scrufdog

Check that man

Another XBOX, another Result:


Falcon 5772
with Freezes and 0010


SMC Settings used:
ANA Fuse Val. = 03
Power mode = 8480
VCS Control = 8555

changed to:
Power mode = 8380
VCS Control = 8555
Result = Freeze ingame after couple of minutes

changed to:
Power mode = 8080
VCS Control = 8565
Result = Freeze after 30 Mins than 0010

changed to:
Power mode = 8280
VCS Control = 8565
Result = No Freeze at Dash and Ingame. Played 4 Hours Metro2033 without problems. + Better Glitch times (unter 1 min.)

Next time you should try that... I can guarantee that it works.
 
You must log in or register to reply here.