RROD after demon install.

[devin122]

I installed my demon and cr3 lite. dumped my flash, and went to boot my stock nand as a sanity check and I get a rrod with secondary error code 0022. Completely removed the cr3 and the problem remains. Same thing happens when i try to boot from the demon NAND flashed with my dump. Any thoughts?

PS. when i was installing the demon i was mistaken and thought i needed to remove the gpu x-clamp to get at one of the points. I did and I replaced the thermal compound while I was there. Also i lifted the POST pad when I was removing the CR3

LOG:
January-04-13 11:48:25 PM

J-Runner v0.2 Beta (283) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

All the best for 2013 - from Team JR!
Version v0.2 Beta (284) is available for download.
Checking Files
Finished Checking Files
Downloaded *xeBuild/13604/_retail.ini
Finished Checking Files
Reading Nand to C:\Users\Devin\Desktop\JRunner283\output\nanddump1.bin
XBOX360
Hardware : Demon Phat
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Reading Nand
Done!
in 0:23 min:sec

Initializing Nand..
Nand Initialization Finished

 

[Antalpromille]

And where are the logs and the pictures of your install?
How hard can it be to read the rules!

 

[devin122]

my bad. Sorry im a bit sleep deprived. just a sec

 

[Antalpromille]

What did the card delivered with the demon said?
Clearly youre not a pro, and sould not have attempted this by your self.
I sugest that you get in contact with a pro in youre area to clear this mess, with a little luck it might be repairable.

 

[Dicko316]

Oh my! I'd stop now mate.

Your just going to cause more damage if you carry on like this, especially if you need to remove the demon to get to a possible short or bridge, which is highly possible looking at the state of your soldering.

If your lifting pads whilst removing something like a CR3, then the Demon is defineately out of the scope or your skillset.

Take note of what Antalpromille said above and get this sent to someone to fix for you.

 

[unleashed1982]

It pains me to see a console go through so much torture

I would listen to the others, and get a pro to finish the job matey

 

[Fwdkiller]

Keep at it no need to send it to a pro there no such thing as a pro in xbox world 75 percent of these guy dont even have a degree in electronic as stated in the demon card better yet they just read tutorials or watch youtube videos. if no one here wants to help you then my friend try google or 360mods.net. good luck

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

 

[Martin C]

It always amazes me the lengths that some people will go to when they just don't want to admit they can't do something. This is just pure stubbornness and now expect others to help you for free.

There are enough people who offer install services so you don't have to put your console through this sh*t. Thread closed.