sacrmento will pay

[case-a-kill]

hey i have and xbox so if i buy all the stuff like the xlcd, pro swich, mod chip x3 and new 120 gig hdd will some one install for me would like info ane your xbox first also will be using xbox live so need original hdd to be safe... email me at [email protected]

 

[dj_deknoi]

Xbox rrod help pls..

Hi all.. Got a 360 that doesnt like being repaired..
Its as the 3rings of death. I have fixed Alot of these but this one wont fix. I have tried different washers, thermal.. The lot. Nothing will work.

So i had to try something else, I brought a Heatgun and did 4 minutes each side. and tried again. But now Its lingers, It stays with the middle green light keeps blinking, If I click the button to connect to pad it spins the green lights etc, then after about 1 minute if does back to 3 rings.

Any Ideas why suddenly Now its staying on geen light for longer, when before Heatgun fix it use go right to 3 rings. Is this better or worse?
Thanks

P.s. the error is 0110

 

[Soulman]

Re: Xbox rrod help pls..

I've fixed bunches of Xbox's with RRoD and NEVER used a heatgun. If it's stubborn in going from red to green lights, keep at it. I guess it's just cuz I'm stubborn but I work on a 360 till it's fixed lol

 

[mosely]

Re: Xbox rrod help pls..

Stop patching xboxs with bolts and washers, reflows and heatguns. Get a proper reball of the gpu.

 

[dj_deknoi]

Re: Xbox rrod help pls..

first: I have kept at it, I have spent Loads of time and Money doing the 3rings fix, beleave me when I say its not working with thermal alone.

Also what you mean by Reball?

 

[dj_deknoi]

Re: Xbox rrod help pls..

Right, I have another problem now.. I tried the rball and On the GPU chip, how you have the big thing ontop where you put thermal and the Tiny little chips next to it, 1 of them have fell off, If I reball this still will it work with 1 of them missing? The big middle thing is fine. Also is it possible to use another GPU chip? I have a 360 that wont turn on. I have ask for help but no one knows the answer. So If I reball that even more careful now I know what I am doing, and Put it on the working board will it work? Also is it the board that as the Code which as match the dvd drive or the board? i.e. ( if I do change the GPU chip, Will I need use the DVD drive which the chip I just put in?)