Can someone please tell me (or link to a tutorial) the best and safest way to undo/ remove the glitch hack and return to stock. I have a zephyr with unreliable boots and want to revert to stock, and sell the console for cheap. Currently it has dashlaunch and dashboard v14699, but when i dumped the nand, it was at v9xxx something. Do you recommend simply flashing back the original nand?? Thanks
RGH Safely remove/undo RGH
- Thread starter Lobsterone
- Start date
BL4K3Y
VIP Member
I had the same problem. Have you tried soldering the Blue cap to the coolrunner or if on Rev.b Coolrunner bridge the onboard connection ?
Mine failed to boot, black screen and green power light on. After fitting cap it's works perfectly.
Also note when my DVD drive was unplugged it also failed to boot, black screen only.
Hope this helps.
Mine failed to boot, black screen and green power light on. After fitting cap it's works perfectly.
Also note when my DVD drive was unplugged it also failed to boot, black screen only.
Hope this helps.
I tried what you said, removed the chip, flashed back the original nand, and was greeted with a big fat E79, which is supposedly related to the HDD, which was not present. Any ideas?
Fisticuffs
VIP Member
It sounds like you're not flashing your original nand back correctly, Reflash the .ecc, Get XELL to boot, Take your original nand, Make a copy of it, Rename it nandflash.bin, Take xenon.elf from the multi_builder/data folder and put them on a FAT16/32 formatted USB stick, Boot Xell, And put the USB stick in and reflash through Xell
Last edited:
Fixed it, I found a tip that said to use Nandpro -w command, and I was using +w. Problem solved. Thanks guys.