SAMSUNG MS28 Sammy MS28 to LiteOn 0272 problem!

[guilhermeo9]

I'm having the following problem:

My Xbox 360 Slim is a TS-H943 MS28 drive, and he ended up burning.

I bought a new 0272 Original Slim drive, and I can't transfer the MS28 Key to the new Slim 0272 drive via JungleFlasher.

I already got a Unlocked PCB and nothing is working.

Here's some Screenshots that might help to solve my problem:

What should I do?

I'm using X360USB Pro

 

[BraveH43]

stop trying to spoof a slim!

 

[guilhermeo9]

But this Xbox IS A SLIM, thats why i'm asking help here.

A long time ago, the stores around here was selling Xbox 360 Slims with Drivers Swappeds from Xbox 360 Phats, since my DVD Drive has burned up, and i've opened this Slim, i've found a Phat Drive Sawed - Off to fit the Slim Case.

Now i've bought a New Slim Drive, original one 0272, trying to fix this problem.

 

[MightyShots]

In the firmware packs you download, i think you can get the orig file. Try just copying and pasting the key in to it and then try writing it. If this works then try IX firmware. I am not sure about this but trying to help mate. Also are you 100% sure it was a 0272 drive before the ms28?

---------- Post added at 17:20 ---------- Previous post was at 17:16 ----------

Copy your key and just load up orig target firmware and leave the source box blank. May work, i know diaboliq20,daleh43 and sp4rkst4rt3r have been around today, maybe these with more experiance might be able to help.

 

[guilhermeo9]

In the firmware packs you download, i think you can get the orig file. Try just copying and pasting the key in to it and then try writing it. If this works then try IX firmware. I am not sure about this but trying to help mate.

I've maded something crazy here using the DVD serial on Lizard Toolbox, and i transfered the key sucessfully to the new liteon.

But it's seems there's something wrong!

This Xbox isn't mine, it's from my cousin and he told me, he delivered this Xbox on 3 other guys doing the Flashing service around here, and i think in one of these guys, they swapped the drive key with another from other Xbox, and i flashed it like 10 times and it's saying Play DVD, not to play the games.

Is there something to recover the original key via nand on Xbox 360 Slim?

 

[rendis.adio]

I've maded something crazy here using the DVD serial on Lizard Toolbox, and i transfered the key sucessfully to the new liteon.

But it's seems there's something wrong!

This Xbox isn't mine, it's from my cousin and he told me, he delivered this Xbox on 3 other guys doing the Flashing service around here, and i think in one of these guys, they swapped the drive key with another from other Xbox, and i flashed it like 10 times and it's saying Play DVD, not to play the games.

Is there something to recover the original key via nand on Xbox 360 Slim?

Yes. Solution is Reset Glitch Hack for retrieving DVD Key.

 

[MightyShots]

Yrp RGH is the solution, as long as you can solder. Dont know if it will tell you what drive it should be though, as the RGH and JTAG are new to me and awaiting the coolrunner board with QSBs before i carry on.

 

[guilhermeo9]

Yes. Solution is Reset Glitch Hack for retrieving DVD Key.

And it's hard to do? I think it's not only the Soldering Iron, something like Resistors, cables and etc.

 

[MightyShots]

Wait for coolrunner, not too difficult coolrunner and QSBs will make it alot easier. You will need other things aswel, check front page news, alot of info about it in there.