severe 1.6 confusion
- Thread starter ferry
- Start date
Re: xbox 360 mod leds and talismoon
If you have too much power going through a wire that cannot cope with the output, you run the risk of burning out some of the resistors or capacitors on the motherboard.
If you have too much power going through a wire that cannot cope with the output, you run the risk of burning out some of the resistors or capacitors on the motherboard.
Re: xbox 360 mod leds and talismoon
oh and the 12v input underneath the board isn't good either so i will keep it with the whisper legacy allone?
oh and the 12v input underneath the board isn't good either so i will keep it with the whisper legacy allone?
Re: xbox 360 mod leds and talismoon
That's what i'd advise. The whisper legacy kit comes with a cool looking fan AND extra leds. Thats all you need really.
But check the game train website I sent you earlier, they have other mods you may be interested in.
That's what i'd advise. The whisper legacy kit comes with a cool looking fan AND extra leds. Thats all you need really.
But check the game train website I sent you earlier, they have other mods you may be interested in.Re: xbox 360 mod leds and talismoon
You can place the extra leds wherever you want. If you're not happy with the results, place them somewhere else. Also, I know they don't look like much, but they are a lot brighter than people think.
You can place the extra leds wherever you want. If you're not happy with the results, place them somewhere else. Also, I know they don't look like much, but they are a lot brighter than people think.
Re: xbox 360 mod leds and talismoon
The leds will either plug into the fan power socket or dvd power socket. Simply follow the instructions that come with the kit. The wires are usually long enough to place the leds where ever you want.They normally have a sticky side that helps keep them in place.
The leds will either plug into the fan power socket or dvd power socket. Simply follow the instructions that come with the kit. The wires are usually long enough to place the leds where ever you want.They normally have a sticky side that helps keep them in place.
Re: xbox 360 mod leds and talismoon
I've seen it in action but never actually fitted one. I'm not sure how its powered. I've seen a vide of the the whisper legacy being fitted and because it takes power from the dvd drive AND fan power socket, i'm not sure where you would get the power from to run it. If anyone else has the answer, I'd love to hear it
I've seen it in action but never actually fitted one. I'm not sure how its powered. I've seen a vide of the the whisper legacy being fitted and because it takes power from the dvd drive AND fan power socket, i'm not sure where you would get the power from to run it. If anyone else has the answer, I'd love to hear it
Re: xbox 360 mod leds and talismoon
Just been looking on ebay for possible power solutions for your mods. Found this
http://cgi.ebay.co.uk/XBOX-360--ENERGYZER-Y-MOD-POWER-CABLE-TALISMOON_W0QQitemZ300451725248QQcmdZViewItem?rvr_id=151330091686&rvr_id=151330091686&cguid=587d8d4f12b0a0aad2b32823ffeaeb46
It allows more than one mod to be plugged into the fans power supply socket.
Just been looking on ebay for possible power solutions for your mods. Found this
http://cgi.ebay.co.uk/XBOX-360--ENERGYZER-Y-MOD-POWER-CABLE-TALISMOON_W0QQitemZ300451725248QQcmdZViewItem?rvr_id=151330091686&rvr_id=151330091686&cguid=587d8d4f12b0a0aad2b32823ffeaeb46
It allows more than one mod to be plugged into the fans power supply socket.
Re: xbox 360 mod leds and talismoon
because if you over draw you could ruin one of two things.
1: You could overheat and kill your power brick or
2: Do damage to your motherboard and possibly cause the DVD drive to loose power and get you ban from xbox live.
because if you over draw you could ruin one of two things.
1: You could overheat and kill your power brick or
2: Do damage to your motherboard and possibly cause the DVD drive to loose power and get you ban from xbox live.
Re: xbox 360 mod leds and talismoon
but i just saw the legacy fan doesn't really need the dvd drive power cause it is only for the 12v switch?
but i just saw the legacy fan doesn't really need the dvd drive power cause it is only for the 12v switch?
Re: xbox 360 mod leds and talismoon
hey the legacy works without the 12v switch so yeah now my idea was smart led storm + core coolers v2 possible?
hey the legacy works without the 12v switch so yeah now my idea was smart led storm + core coolers v2 possible?
Re: xbox 360 mod leds and talismoon
nobody? and is the 12v switch from tzlismoon whisper legacy safe?
nobody? and is the 12v switch from tzlismoon whisper legacy safe?
Re: xbox 360 mod leds and talismoon
well I have the legacy in my box, but that's all I have in it. I wouldn't put anything extra in with the legacy if you plan on using the 12v setting.
well I have the legacy in my box, but that's all I have in it. I wouldn't put anything extra in with the legacy if you plan on using the 12v setting.
Re: xbox 360 mod leds and talismoon
hey,
oke this weekend i am going to put smart led storm in the xbox and cut the case.
but a question is it save to use core coolers v2 with the smart led storm v2?
hey,
oke this weekend i am going to put smart led storm in the xbox and cut the case.
but a question is it save to use core coolers v2 with the smart led storm v2?
Re: xbox 360 mod leds and talismoon
ok so i did my custom mod today but now my fans stopped spinning. any ideas what that might be? or what could cause that? any fix?
ok so i did my custom mod today but now my fans stopped spinning. any ideas what that might be? or what could cause that? any fix?