Slim 0225 unresponsive.

[Invi]

Alright, well i was going to flash my 0225 drive. I have the 360 lizard and all that. Used lizard toolbox. Downloaded latest filesets. Went to the custom firmware generator and chose LTPLUS2.0 c Fileset. Loaded the original firmware at the top and all that. Unlocked the drive and everything was still working. It opened and closed and turned on. So, after i go and flash it, it just becomes unresponsive. It wont eject or anything. Middle light just keeps flashing. Anyone know what i could have possibly done wrong??

 

[Smertios]

Sounds like a bad flash.You need to do the PMT method by Locating MPX01, it is labeled on the PCB. This will revive your drive. Reflash to stock firmware. check xbox for flashing light, then flash back to LT 2.0

 

[Invi]

you think there is a guide somewhere?

 

[ReMix]

jungleflasher tutorial page 197

 

[Invi]

i get this everytime


Sending Vendor Intro to port 0xEF00
Status 0x80
Re-sending Vendor Intro:
.
Serial flash found with Status 0x72

Sending Device ID request to port 0xEF00
Spi Status: 0x01
Manufacturer ID: 0x90
Device ID: 0x90
Flash Name: Unknown type
Flash Size: n/a



and keeps saying: Unknown flash type Erase aborted !

 

[Smertios]

when it gives you flash name unknown type and flash size click intro device. it should show up correctly.

 

[Invi]

lol....

Well now i'm getting this

Sending Device ID request to port 0xEF00
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

When i try to write firmware:

Getting Status from port 0xEF00
Invalid Status 0x0

 

[Smertios]

dump the firmware first.

 

[Smertios]

click intro device again after clicking unlock Spi Status

 

[Invi]

everytime i try to do anything, just keeps saying there is no drive detected. Just starting to piss me off. Might just sell it.

 

[Smertios]

You need to pmt method, then lite on erase it to get it in vendor mode. Pmt will work believe me on what I say because I had this same problem.

 

[Smertios]

Don't give up bro its very easy to fix. Take your time and follow jf tutorial slowly on PMT bad flash recovery for your drive.

 

[Invi]

Dunno man, just doesn't wanna cooperate with me. Thinkin bout just gettin a replacement drive.