(using jf 1.87, with x360 usb pro on fw .18, and ck3 pro) Ok so i had a locked 0401 win bond drive, i extracted the keys first, then did the kamikaze hack and got the 0x3, exited jf then reopened it, clicked intro, read, then while its reading after 6 dots it freezes and then i get the message saying "stage 1 authorisation failed!", i redid the steps many times and tried doing some other random things, but its not working, i have no clue what else to do, can anyone help me please??? also i uninstalled .net 1.1 which i read might help.....
LITEON DG-16D4S - SLIM slim 0401 read stage 1 authorisation failed!!
- Thread starter ooway
- Start date
Have you got all the current firmware extracted to the proper folder ? Need original fw s to compare to your drive while its extracting otherwise it wont work
---------- Post added at 14:02 ---------- Previous post was at 13:54 ----------
Make sure you directly put the files into the firmware folder not another within the firmware folder understand ?
---------- Post added at 14:02 ---------- Previous post was at 13:54 ----------
Make sure you directly put the files into the firmware folder not another within the firmware folder understand ?
ok so now i get this, and i only get it if I quickly turn off and on the drive from ck3 pro while it says reading key, lol i have no clue what else could be wrong, could be the winbond chip.....also now i am not able to dump using slimkey from dvdkey, but already backed it up in the beginning, is that normal after the kamikaze hack?
---------- Post added at 12:24 ---------- Previous post was at 12:23 ----------
sorry for got to post what i got when turned off and on during reading key
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x3C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Serial flash found with Status 0x72
Reading Drive Key.
............
Authorised !
Grabbing sector 0x3E000.
................
Blank 3E000 sector detected!
Known f/w confirmed !
Sending Vendor Intro to port 0x0000
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Updating flash for on-line dump.
Sending Sector Erase to Port 0x0000
---------- Post added at 12:25 ---------- Previous post was at 12:24 ----------
it freezes on sending sector erase.....
---------- Post added at 12:24 ---------- Previous post was at 12:23 ----------
sorry for got to post what i got when turned off and on during reading key
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x3C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Serial flash found with Status 0x72
Reading Drive Key.
............
Authorised !
Grabbing sector 0x3E000.
................
Blank 3E000 sector detected!
Known f/w confirmed !
Sending Vendor Intro to port 0x0000
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Updating flash for on-line dump.
Sending Sector Erase to Port 0x0000
---------- Post added at 12:25 ---------- Previous post was at 12:24 ----------
it freezes on sending sector erase.....