ANSWERED Slim 4GB boots Xell, black screen for normal boot

[b4nn3d]

What possible reasons are there for not booting to dash. I only get black screen. The CR green led blinks 1-5 times.

Xell boots fine from eject-button. Within 1-3 green blinks.

I made the RGH image with MultiBuilder 0.7.

I did search and some one got a problem with the LDV value. I did not update the dash after NAND dump so is this a possible fault then?

I have successfully glitched two slims and I routed the wires similarly.

 

[Noob.Si.BOT]

Whats your motherboard on your console?

 

[b4nn3d]

Whats your motherboard on your console?

It's slim so it's Trinity motherboard.

 

[Dimrain13]

pics of the soldering?

 

[frazzeld]

How did you flash your image?

Edit: A couple of things for you to do to enable other to diagnose your issue

Post an image of your original nand in 360 Flash tool

Post your nandflash log from multibuilder

 

[Martin C]

Check my LDV sticky.

Guys - it's NOT his soldering.

 

[b4nn3d]

pics of the soldering?

 

[b4nn3d]

How did you flash your image?

Edit: A couple of things for you to do to enable other to diagnose your issue

Post an image of your original nand in 360 Flash tool

Post your nandflash log from multibuilder

---------- Post added at 21:26 ---------- Previous post was at 21:24 ----------

Check my LDV sticky.

Guys - it's NOT his soldering.

Four 'F' in rows 7-8.
Multibuilder says "CF LDV : 4"
And highest LDV value in Flastool is also 4.

Thanks to all trying to help. I hope we crack this stubborn slim.

 

[frazzeld]

did you flash via usb

 

[b4nn3d]

did you flash via usb

Flashed via Xell with nandflash.bin and xenon.elf.

 

[Hackerjac]

i did my slim doing x-mas and had the same problem as you, but when flashing the nand with nand-x is worked

 

[b4nn3d]

i did my slim doing x-mas and had the same problem as you, but when flashing the nand with nand-x is worked

ZOMG!!! That was it. I did not think Xell flashing could FAIL. I flashed like 5-7 times from Xell.

 

[Hackerjac]

i diden't thought it could either
well glad it worked for you

 

[Martin C]

Just as a thought, what version of rawflash were you using?

 

[Hackerjac]

i was using the version in multibuilder 0.7

 

[Martin C]

It's probably worth updating to rawflash v4 then, as there are improvements.

FTR, I always flash the new NAND with nandpro.

 

[b4nn3d]

It's probably worth updating to rawflash v4 then, as there are improvements.

FTR, I always flash the new NAND with nandpro.

Updated to Rawflash V4 and it flashed fine. Dash boots fine.

 

[Martin C]

Cool - thanks for getting back to us!

 

[Hackerjac]

ok, guess i need to update to v4 also, nice to know