- Aug 1, 2012
- 177
- 0
so i have installed a slim demon into a falcon rgh2 console and everything boots just about fine , the stock side boots no problems { sometimes i need to turn off the coolrunner rev c } and the demon glitch times go from 5 mins all the way up to 1 hr , what i need is some help with keeping the glitch times down to the lowest i can , im willing to try and get it around 3 mins if possiable , i also did something that i dont know if someone has done but i took the stock rf board and used the stock led's and modded them to only be red led's { no green } all i did was installed a wire from one point on the led to another point on the led and it then made them all red when it boots and when it is on , no i did not take out the stock led's and ad red ones just added some wire to mod it into a red ring instead of the green ring , i can put pics up , its easy so can some one please help me get a straight glitch time so i can make this demon boot faster and easier , here are some pics of my unfinished work
Attachments
-
1.3 MB Views: 69
-
1.5 MB Views: 61
-
1.1 MB Views: 60
-
1.3 MB Views: 70
-
1.5 MB Views: 54
-
1.5 MB Views: 58