Slim drive problem

[Ticallion]

The original board I have says 'Write verify failed' when flashing, could the pout fix, fix that problem too?

No, that's nothing to do with the eject mechanism.

 

[xtg_ironzzz]

No, that's nothing to do with the eject mechanism.

Oh yeah, the pout fix speeds up the drive tray, doh.

I'll report back my results.

this image http://xbox360-flashing-uk.co.uk/dvdfix.png

How does the resistor go? it's unclear to me.

 

[TilVl]

How unclear? There are pictures. Desolder the wire and solder the resistor to the pad. Then solder the wire to the end of the resistor. It will slow down the tray.

Sent from my SGH-T839 using Tapatalk

 

[xtg_ironzzz]

How unclear? There are pictures. Desolder the wire and solder the resistor to the pad. Then solder the wire to the end of the resistor. It will slow down the tray.

Sent from my SGH-T839 using Tapatalk

I've never used resistors or anything like that before.

So it goes like this
http://gyazo.com/ae7ec0699660a979aa3b546441c2d449.png

???

 

[xtg_ironzzz]

Ok, I tried doing the Pout fix but it still wouldn't eject so I've just bought a MXIC PCB with the Switch installed then sending this one back.

 

[TilVl]

You did it wrong. You need to do it like this.

Also you need to try different resistors to try and get the speed down.

 

[xtg_ironzzz]

You did it wrong. You need to do it like this.

Also you need to try different resistors to try and get the speed down.

It's too late now, I sent the board back already just waiting to see what the guy says, I've bought a MXIC with Sputnick switch pre-installed. If the guy refunds me for the first one then I don't lose out

Thank you all who helped it was really appreciated in my time of need!

 

[sdboltdude]

try a little wire gluse...
just a Small drop in kami whole......

this worked for me after customer brought me a failed kami

 

[twicked]

Worst case scenario, you can replace the drive cheaply and kamikaze it yourself. I can pick up drives for $20-$30 locally from console repair enthusiasts. Just use OG Key and LT+ fw and you'll turn that frown upside down.


We've all gotten a raw deal. Most important thing is to be patient and think clearly.. panicking just makes it worse, from my experience.


(Side note: When I first started flashing, I thought you had to kamikaze the slims before you could extract the key--- Not only was I wrong, but I went too deep and fubbed the whole drive up. No key to replace drive with. Had to replace the whole system since I do not have any RGH tools... :facepalm