RGH Slim E Corona V6 does not work

P

Petrinisko

Junior Member
Oct 14, 2013
18
0
Slim E 4GB Corona V6
MFR 2013-05-24
J-R Programmer
16537
13182

I needed to get only CPU and DVD key
console does not work after writing original NAND

after writing the original NAND
I removed:
POSTFIX ADAPTER
DGX v1.0S
Wires (5V, E, F, CPU RST, POST OUT)
Bridge (R2C6, R2C7)
QSB not used

nanddump1.bin is correct
PSU - OK

after the start of the console began to High fan speed
after shutdown does not start anymore

please help

...................................................................
Added Log

J-Runner v0.3 Beta (3) Started

Checking Files
Finished Checking Files
Corona 4GB Manually Selected
F:\
Reading from F:\ to E:\Xbox-tools\RGH\J-Runner\output\nanddump1.bin
Done!
in 0:06 min:sec
F:\
Initializing nanddump1.bin..
Reading from F:\ to E:\Xbox-tools\RGH\J-Runner\output\nanddump2.bin
Corona 4GB
RGH2 Selected
Nand Initialization Finished
Done!
in 0:06 min:sec
Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same
ECC created
Writing to F:\ from E:\Xbox-tools\RGH\J-Runner\output\image_00000000.ecc
Done!
in 0:00:367 min:sec:ms
Initializing nanddump1.bin..
Corona 4GB
Nand Initialization Finished
Getting info from ip 10.0.0.38...
LockDownValue is 1
Initializing nanddump1.bin..
CpuKey is Correct
Added Key to Database
Corona 4GB
Nand Initialization Finished
Moving All files from output folder to E:\Xbox-tools\RGH\J-Runner\092814432143
Connection TimeOut
Extracting..
Saving SMC_en.bin
Saving SMC_dec.bin
Saving KV_en.bin
Saving KV_dec.bin
Saving smc_config.bin
Initializing nanddump1.bin..
Corona 4GB
Nand Initialization Finished
Extracting..
Saving SMC_en.bin
Saving SMC_dec.bin
Saving KV_en.bin
Saving KV_dec.bin
Saving smc_config.bin
Working...
Saving fcrt_en.bin
Saving fcrt_dec.bin
Saving C-R.bin
Saving key.bin
Done
Save location E:\Xbox-tools\RGH\J-Runner\output\Extracts-092814432143
Initializing nanddump1.bin..
Corona 4GB
Nand Initialization Finished
Writing to F:\ from E:\Xbox-tools\RGH\J-Runner\092814432143\nanddump1.bin
Done!
in 0:26:20 min:sec:ms

http://i40.tinypic.com/2rc96pf.jpg

http://i40.tinypic.com/2r74y3c.jpg

POSTOUT
http://i43.tinypic.com/15f1u9j.jpg

CPU RST
http://i40.tinypic.com/zikvbk.jpg
 
Last edited:
MrBucket101

MrBucket101

VIP Member
Jul 3, 2005
201
0
Louisville, KY USA
If everything has been successfully removed, and your original nand has been successfully re-written to the console. Then you most likely damaged something during your install.

Post pics and your J-Runner log
 
Antalpromille

Antalpromille

VIP Member
Aug 4, 2011
3,146
0
Borås, sweden
Petrinisko said:
Yes, everything worked correctly :)
Click to expand...
My point is that you have taken a piece of TX equipment, installed it in an uncorrect way, and now when you are having problems you come here and want help. And all this just to save a few $$.

Edit: aparently its not working perfect, or why are you having problems?
 
Last edited:
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
If you've written the original NAND back, it should work provided you've not lifted any of those pads. Have you checked all pads for continuity?
 
P

Petrinisko

Junior Member
Oct 14, 2013
18
0
Antalpromille said:
My point is that you have taken a piece of TX equipment, installed it in an uncorrect way, and now when you are having problems you come here and want help. And all this just to save a few $$.

Edit: aparently its not working perfect, or why are you having problems?
Click to expand...
This is not about saving money.
I install QSB always
But why here? I just need to get NAND and then back on stock
 
Antalpromille

Antalpromille

VIP Member
Aug 4, 2011
3,146
0
Borås, sweden
Petrinisko said:
This is not about saving money.
I install QSB always
But why here? I just need to get NAND and then back on stock
Click to expand...
I think it is about sawing a few $$ otherwise hou would have bought a QSB and installed the way its supposed to instead of doing that wire install with those thick wires and risking damaging the pads and causing problems for yourself. As Martin said, check the nandpads for damage and answer the question about the other RGH points and what you used to glitch the console.
 
moco

moco

VIP Member
Feb 3, 2004
458
0
Australia
Petrinisko said:
Pads okay,soldering points okay, voltage on the MB found...
Click to expand...
Pads might look okay but you may have broken 1 if not a few. Its worth fully cleaning them up and having a further look.
 
valentin

valentin

Senior Member
Nov 17, 2003
136
0
Slovakia
Hello, have you solved this problem ? I have the same problem with my Xbox. I want to glitch it but doesnt work. So i writen back the original NAND and tested it. It worked but after i have desoldered the NAND RW KIT now it doesnt work. I dont know why.... Everything is OK ... pads are OK, continuity and resistance are OK, CPU_RS and POST_OUT OK. E, F, C5R11 is OK too. I have checked all resisors in the area of U1D1. Everything there is OK but Xbox dont work. No sound and no light.
 
You must log in or register to reply here.