RGH Slim Freezes on Xbox Screen

[GameSysRepair]

So Xell worked fine after i redid the solder on this board changed all the wires and everything made it look alot better, plus its working now so that says something too.

Anyways this is a trinity box with TX Coolrunner, boots Xell fine, write Freeboot.bin and xbox screen come ups and then just stops, just like it would on a phat that was bout to RRoD. Also i have the originals from when the guy started to try it and wasnt doing to good, between his reads and mine they are different. Both mine match and both his match but there are 81 different blocks between the 2 files.

I used the ecc file he made with his reads, and Xell booted fine, created one from mine and nothing. also trying to create a freeboot with my reads wont work either. Also had to remove the solder boards from the mobo so its all directly wired in right now.

Any help would be great, looked all over and didnt find anything...

 

[faz2k2000]

Make sure you checked for bad blocks in Xnandhealer or 360 dump tool. Check all solders &

make your hacked karnel through multibuilder and flash it through rawflash v3.
Your problem would be solved. If not, try building without dashlaunch plugins.

Thanks

 

[GameSysRepair]

Well I know its not my soldering cuz before I redid all of it, it wasn't even booting into xell. Now its almost instant. I can hit the eject with how it is now and it boots xell just when I push the power is when it freezes on the xbox screen. But ill try the other things and see what happens.

 

[ball00]

Can't help too much but it is normal tht your nand reads dont match his. Booting the console between nand reads will change the nand so that's why they don't match.

 

[frazzeld]

Create another image (Freeboot or ggbuild) nandflash.bin

 

[diaboliq20]

use multi_builder and rawflash

 

[GameSysRepair]

Guess you learn something new everyday. Didnt know that turning the system on would change the NAND. So tried with the multi_builder and raw flash and no luck. Still getting the same problem freezes on Xbox startup screen then after a min or so E70 pops up.

Same if i create the file without dashlaunch.

 

[Ubergeek]

Follow the troubleshooting advise in the guide