Slim Lit-on

besty

VIP Member
Jan 30, 2012
263
0
HI all just got xbox slim gear of war model looking to flash the lit-on drive it on dash 2.0.14699.0,I done a few fats but never a slim so this be my first try what stuff do I need and what best way to do one not opened it up yet to find on what model Lit-on it is thanks all .
 

abyss

VIP Member
Dec 16, 2010
187
0
Belgium
there is currently no way to tell this as far as i know
you have to open it up to be 100% sure
but the GoW model has 99% a DG16D5S drive and 100% a corona board

or look here :http://www.360drives.com/list

greetings,
Abyss
 
Last edited:

-DoC-

VIP Member
Jul 23, 2004
682
48
US
Not true at all.

It's most likely a DG16D5S but it's likely a trinity board.

Most GOW3 are trinitys - I know because I have 2 of them.

You will have to open the drive to see if it's a MXIC or Winbond (both of mine were MXIC)

Uber has a post here to tell which is which
 

pas7680

VIP Member
Jul 18, 2006
190
0
derbyshire UK
the kamikaze hack isn't for the faint-hearted, i wouldn't recommend you do it yourself unless you have read all the tutorials first and then still have no worries about killing the drive should you make a mistake.

You would be better off getting a pro modder to do it, or buy a tx replacement pcb.
 

sarah1331

BANNED
Feb 22, 2012
867
0
Not true at all.

It's most likely a DG16D5S but it's likely a trinity board.

Most GOW3 are trinitys - I know because I have 2 of them.

You will have to open the drive to see if it's a MXIC or Winbond (both of mine were MXIC)

Uber has a post here to tell which is which
Not true it will be a 16d4s
And most I have had has been mxic
All are been trinitys