RGH Slim No power!!

[jeremy790]

So I got a slim board from someone who tried to do there own rgh install. I got the orgiball nand dumps but afer ther rgh install there is no power. Now I figured he had done something to the cpl_byps but all the resistors test good. Any ideas.

 

[esbmaepo]

So I got a slim board from someone who tried to do there own rgh install. I got the orgiball nand dumps but afer ther rgh install there is no power. Now I figured he had done something to the cpl_byps but all the resistors test good. Any ideas.

Check resistors by STBY_CLK point

 

[jeremy790]

I did. The it measures good but the point next to it is kind of trashed!

 

[Krafter]

Post some pics. And did you check the trace too or just the resistor?

 

[x360ccm]

best of posting good clear pics of the STBY_CLK point

 

[ochbay]

if the resistors on the stby_clk are good i would deffinetly check the trace

 

[RavenPhoenix]

Do a search on trace repair for the stb_clk point as that would be my guess of what is wrong. We could get a better idea if you posted good quality close up pics of the points in question.

 

[Rock]

Repair the trace and a good search for trace repair will bring you to the right thread

 

[jeremy790]

Went ahead and did a trace repair on the STBY_CLK and guess what it works fine now. Thanks for the help. I have had a couple phats that had the same problem but wasn't sure about the slim beings this was the first I had with this problem.