ANSWERED Slim not glitching??

M

Mike the Mod Man

Junior Member
Jan 15, 2011
10
0
Sacramento
I have glitched about 10 slims so far with no problems what so ever. I got another slim recently and when I tried to glitch it, nothing happened. Xell never appreared. I went back through my wiring, etc and still nothing. I know that everyone will say show me pics of the wiring but I already took everything off. Here's my question... There was a "refurbished sticker" on it but the console was not opened. It was from a game store "won't say which one" but has anyone come across a xbox like this that just won't glitch??
 
Disperat

Disperat

Senior Member
Jan 3, 2012
100
0
The green light on the CoolRunner is glitching (blinking)? Have you tried to witch from Slim to Phat? How much time did you wait for it to start Xell? Have you tried to alternate position and coil for the blue wire? Different lenghts of the blue wire? Many questions, I know. :)

---------- Post added at 19:29 ---------- Previous post was at 19:27 ----------

Edit: Loosen / tighten the coil of the blue wire I meant by "alternate position for the blue wire".
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Mike the Mod Man said:
I have glitched about 10 slims so far with no problems what so ever. I got another slim recently and when I tried to glitch it, nothing happened. Xell never appreared. I went back through my wiring, etc and still nothing. I know that everyone will say show me pics of the wiring but I already took everything off. Here's my question... There was a "refurbished sticker" on it but the console was not opened. It was from a game store "won't say which one" but has anyone come across a xbox like this that just won't glitch??
Click to expand...
There's a sticky in this forum which I wrote entitled 'pics'.

Read it and come back when you have more information.
 
M

Mike the Mod Man

Junior Member
Jan 15, 2011
10
0
Sacramento
I don't have pics of the screen since I already returned it back to stock. I tried to write the ecc file about 3 times and the flashed the glitch board too. No issues reading the nand or no bad blocks. I used a slim qsb post board and tried to use different wire lengths. Yes, the green light was blinking and I tried to switch it from slim to phat as well. Like I mentioned in my first post, I've done about 10 of these so it's pretty straight forward for me. I'm still thinking that when it was "refurbished" something was done to it to block xell from loading. I could be totally off but I re-traced my steps about 3 times for the whole process and still couldn't get it to boot. Anyone else try to glitch a "reburbished" slim?
 
You must log in or register to reply here.