X360USB PRO slim o225

[nishat]

Hello friends.

I unlock my windbond and wrote the firmware before and i lock my drive after it and now i want to update my firmware to 3.0 and know i m not able to reunlock the drive. Can you advise me how to unlock the drive again.

please help me.

 

[rdubbs007]

Hit 0x8C and dab a rubbing alcohol soaked qtip onto the drill mark

 

[nishat]

I dont have the rubbing alcohol i have soldering iron

 

[rdubbs007]

get some

 

[frayed]

I dont have the rubbing alcohol i have soldering iron

take the advise given to you, walk yourself to the corner store and spend the 2 bucks on a bottle of rubbing alcohol

 

[nishat]

take the advise given to you, walk yourself to the corner store and spend the 2 bucks on a bottle of rubbing alcohol

I dont know what is rubbing alcohol con i use thinner

 

[rdubbs007]

 

[nishat]

I m going to buy this and thanks for the picture.

---------- Post added at 20:00 ---------- Previous post was at 19:55 ----------

i got the rubbing alcohol and what i have to do know.

 

[rdubbs007]

Hit 0x8C and dab a rubbing alcohol soaked qtip onto the drill mark

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

 

[nishat]

I hit 0x8c and start dabbing on the hole but no response i m using this (see the attachment)

 

[Martin C]

rubbing alcohol works for some but not others. Get the leg of a resistor and put it in the hole. You're trying to make contact of the line you cut.

 

[GhostFace606]

I hit 0x8c and start dabbing on the hole but no response i m using this (see the attachment)[/QUOTE

Do as rdubbs007 says,but I must add I have one a little stubborn as yours.just keep applying the alcohol and apply a small amount of pressure to the hole.

 

[rdubbs007]

Yeah alcohol will work every time if you keep working it. I personally found the stubborn ones that dont work right away just need the drill hole widened and even deepend EVER so slightly, but if I were you I would NOT touch the hole after it already works. Do as martin said and get in there with a small piece of wire / resistor leg.

PS: I see you didnt get the 7-11 variety, oh well