slim proto no glitch

[scott1503]

what do u mean about wrong spot ? cuz i connected my E / F as the install / tuning guide says .

Nope there wrong they need switching over F should be two points up from the 5V and E should be 1 to the side of F . You have E where F should be and F where E should be.

Look here

 

[cod3mwf]

is it normal for the slim proto chip to light red and green on standby ?

 

[XDK]

is it normal for the slim proto chip to light red and green on standby ?

Only red should be lit up in standby.

 

[cod3mwf]

mine is red and green on standby

 

[cod3mwf]

and the main chip is getting super hot too

- - - Updated - - -

and the main chip is getting super hot too

 

[Oggy]

I presume that that is what the proto does when incorrectly installed.

 

[cod3mwf]

hm but even with just 5v and gnd cable still i propably gonna trash this slim and wait for my phat console

 

[Antalpromille]

hm but even with just 5v and gnd cable still i propably gonna trash this slim and wait for my phat console

Where are you located? It would be a shame to waste that slim and i might be able to fix that install for you.

 

[cod3mwf]

Well Antalpromille i live in Dalarna grycksbo sweden if u want to i could pay u 500 SEK + shipping if u fix it and makes the rgh work

 

[cod3mwf]

well just so u know post_out undersidde is gone the alternate point gone too only way is a trace cut i think
cpu_rst is alternate point alredy, lifted pad problem

 

[Antalpromille]

well just so u know post_out undersidde is gone the alternate point gone too only way is a trace cut i think
cpu_rst is alternate point alredy, lifted pad problem

I think i can make it run anyway, PM me and well discuss the details

 

[Antalpromille]

turned out to be a faulty CPU_RST in combination with a faulty slim proto. it did actually have two legs lifted on the main IC but still didnt work after i fixed that.
glitched almost instantly with a new one after i fixed the broken CPU_RST trace and the lifted post_out1.

https://www.dropbox.com/sh/ypjafve25hvv4ia/BDx5ohCMnf
(the old proto is installed on these pictures)