slim proto with demoN

S

sjoerdvz

Full Member
Mar 2, 2012
32
0
hello I have a little problems with mine demon i have installed a slim proto to my corona v1 works great now I have installed the demon all works oke stock nand is booting but when I switch to demon nand the coolrunner wont glitch its stay off on stock nand and demon nand I don't have solder CR_en wire what to I wrong? I want both nand to glitch pictures of install http://imageshack.com/a/img853/2651/aymt.jpg
http://imageshack.com/a/img51/9485/tgyd.jpg
 
Last edited:
Utmad

Utmad

VIP Member
Aug 15, 2010
3,304
118
Southampton, UK
sjoerdvz said:
hello I have a little problems with mine demon i have installed a slim proto to my corona v1 works great now I have installed the demon all works oke stock nand is booting but when I switch to demon nand the coolrunner wont glitch its stay off on stock nand and demon nand I don't have solder CR_en wire what to I wrong? pictures of install http://imageshack.com/a/img853/2651/aymt.jpg
http://imageshack.com/a/img51/9485/tgyd.jpg
Click to expand...
If you read the instructions, you have to solder to pin 22 of the IC for CR_EN, you will have to fit the jtag header and fit the adaptor with the cr_en pad and attach a wire between the two points.

http://team-xecuter.com/forums/showthread.php?t=139308

 
Last edited:
  • Like
Reactions: kingshweaty
S

sjoerdvz

Full Member
Mar 2, 2012
32
0
yes I have try that to solder that wire but glitcher stay off it will not glitch is there no way to get it glitch on both nand rgl loader and freeboot?i don't want a stock nand
 
Last edited:
S

sjoerdvz

Full Member
Mar 2, 2012
32
0
yes martin both are freeboot but the glitcher will not glitch with slim proto when I use RGX chip 1.0S it glitch but cant boot on RGX no mather with timing or wire my slim proto glit in 3 cycles and no CR_EN wires I don't want stock nand
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
If you can't get the slim proto to glitch from the DemoN NAND, that's not a CR_EN issue at all.

Try building a standard freeboot image, writing it to the DemoN then posting the log.
 
S

sjoerdvz

Full Member
Mar 2, 2012
32
0
yes its not glitch from demon nand and stock nandChecking Files
Finished Checking Files
Initializing nanddump1.bin..
Corona
RGH2 Selected
Nand Initialization Finished
Load Files Initiliazation Finished
16537
Started Creation of the 16537 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.09.639
---------------------------------------------------------------
base path changed to D:\Xbox\Nand Tools\J-Runner\xeBuild
---- { Image Build Mode } ----
building glitch2 image
---------------------------------------------------------------
D:\Xbox\Nand Tools\J-Runner\406194421205\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16537.0
Console : Corona
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 406194421205
ConsoleId : 052283802224
MoboSerial: 7909818200082125
Mfg Date : 03/19/2012
CPU Key : 85D184BDA5E6E613BE48B1833ADB6E4D
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : BA7E08BA643D7D036044FA3FB5EF1148
CF LDV : 1
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to D:\Xbox\Nand Tools\J-Runner\406194421205
Image is Ready
DEMON
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0x1EF
Writing Nand
Done!
in 0:25 min:sec
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Erase and re-write the image to the DemoN. If you still get an invalid block, remember to use the Advanced Write feature of J-Runner.
 
S

sjoerdvz

Full Member
Mar 2, 2012
32
0
yes I have try no luck its look when demon installed coolrunner turns off on both nand if I solder DXG 1.0 that green light work on DGX/RGXbut I cant glitch time are over 10min to glitch when I solder slim proto CR back green light on coolrunner wont flash with freeboot somehow its turned off or somting when I put my orginal nand dump back its boot from demon with slim proto and stock onboard nand
 
S

sjoerdvz

Full Member
Mar 2, 2012
32
0
I have found that the glitcher is not working anymore that the problem I have a DGX 1.0 there it will glitch in 20min but I have a coolrunner rev c that need a crystal 4800mhz its possible to get them from dgx and than solder to rev C coolrunner?
 
S

sjoerdvz

Full Member
Mar 2, 2012
32
0
martin is there a ALT point voor demon control pin 22 on slim proto that pin is very hard to solder
 
Antalpromille

Antalpromille

VIP Member
Aug 4, 2011
3,146
0
Borås, sweden
sjoerdvz said:
martin is there a ALT point voor demon control pin 22 on slim proto that pin is very hard to solder
Click to expand...
If you can solder its not that hard, and if you cant solder then dont do it. Theres no known alternative point.
 
You must log in or register to reply here.