Slim RF board disable touch controls?

[Element18592]

Okay so Ive removed the ribbon cable from the rf board that makes no difference. If i touch the board itself in a certain spot the disc drive will eject or close. Basically what im asking is maybe there is a component on the board that i can remove that will stop this. Its necessary for me because its in a laptop mod project i have, that im now trying to sell however on a rare occasions the Xbox will turn off and eject when you touch the case. Its completely finished but this is the only problem i have that i would like to straighten out. If you guys could be of some help i would really appreciate it.

Here is a pic of the laptop if you guys wanted to see it:


Also, Happy Thanksgiving!

 

[chase]

hey.. check out how this guy built his.. may help .. nice job tho

[video=youtube;6EBQv-h6a8g]http://www.youtube.com/watch?v=6EBQv-h6a8g[/video]

 

[Martin C]

If i touch the board itself in a certain spot the disc drive will eject or close

Where specifically? You mean on the far left? Maybe you're shorting the RF board, so insulate it.

 

[Oggy]

Give it to matt2416 - He'll burn those pads off in an instant and they'll no longer be an issue.

 

[Element18592]

Where specifically? You mean on the far left? Maybe you're shorting the RF board, so insulate it.

I have insulated it, that's what was getting me, so after that didn't work i tried finding a way to remove the touch, i removed a few resistors in line of the ribbon cable connector, that seemed to help as it wasn't so sensitive anymore however it still could be touched and powered on or ejected. I swapped with a new rf board and it seems to be working fine now once fully closed. Thanks for the tips guys

 

[stmem]

Looks real nice, if you block it off from the case (so its not touching the case at all that might work?)

Sent from my GT-I9300 using Tapatalk

 

[Antalpromille]

im not 100% sure but i would try removing U7 carefully and see if that makes any difference.

 

[XMonsterModsX]

would you mind posting what guide you used in making this. always wanted to make one and now have money to do it