Slim Trinity

T

Thanet_360s

VIP Member
Dec 6, 2011
180
0
Thanet, ENGLAND
IDK if anyone has similar issues BUT, i have soldered everything in, flashed nand with image_00000000.ecc and programmed CR. Everything is back together yet all i get is a BING yet no glitch on the CR. I have blinking power LED on slim and i also get red power light on CR but no flashing green LED :facepalm:.

please find pics of all soldering. hope someone can help :D


Many thanks,

Nate
 
D

DayvG

VIP Member
Apr 26, 2007
473
0
Gosport, UK
superspeed said:
Did you flash the coolrunner?
Click to expand...
If I'm not mistaken a CR that hasn't been programmed with have both red and green LED's lit, so we can assume he has.

Edit: Plus he says he has.
 
Last edited:
  • Like
Reactions: Thanet_360s
D

DayvG

VIP Member
Apr 26, 2007
473
0
Gosport, UK
If its not glitching it may be down to interference or wiring positions. Try moving the coiled wires and maybe rerouting your wires.
 
T

Thanet_360s

VIP Member
Dec 6, 2011
180
0
Thanet, ENGLAND
rdubbs007 said:
Have you verified the continuity of stby_clk to ensure that it is connected 100%? Multimeter the QSB side of the mobo resistor and the hana side of the QSB resistor to test.
Click to expand...

you are a DIAMOND! YTF didnt i check that?? :facepalm: solder had to be "stretched" to reach the resistor as it wasn't connecting with the solder under the QSB. :rolleyes2:

Just as a reminder to everyone then, and i will DEFINTELY do this in future, DOUBLE DOUBLE DOUBLE CHECK ALL CONNECTIONS using a multimeter set to beep :cool2:
 
D

DayvG

VIP Member
Apr 26, 2007
473
0
Gosport, UK
rdubbs007 said:
That would not cause the green light to not blink. That would be caused by a bad connection or failed connection on one of the points.
Click to expand...
My bad, I didn't read it properly.
 
D

DayvG

VIP Member
Apr 26, 2007
473
0
Gosport, UK
Glad it's sorted mate.
 
You must log in or register to reply here.