RGH Slim-xell boots fine, Xbox logo freeze

[Martin C]

Try this:

nandpro nandflash.bin: -r16 1a8.bin 1a8 1
nandpro nandflash.bin: -w16 1a8.bin 3ff
nandpro nandflash.bin: -e16 1a8 1

write this file to your console with XeLL. (rawflash v4).

 

[voldemrd]

remaped.. xell is still halting bad block and logo is freezing

 

[Martin C]

ok - pics of your wiring then as it may be related to that.

 

[voldemrd]

ok that my be problem.. my camera is broken and i can only take pictures with 2,0Mpx cell phone or.. i can describe it ... soldering is 100% good ... wires are from ripped USB cable .. about 30cm long ...all wires are going straight from cpld to motherboard... only cpu_reset is little coiled under the motherboard

 

[Martin C]

ok - wait up.

Can you confirm you have a TX Coolrunner?

 

[voldemrd]

not for slim.. i have it in one of my FAT consoles ... but i tried it with it too ... it was the first thing i did when it started freezing .. but with no succes... but boot times were a lot faster than c-mod

 

[Martin C]

Then we'll have to stop there unfortunately.

this is a TX support forum. No NAND-x and no TX CR = no support.