LITEON DG-16D4S - SLIM Slimkey Fail. (X360USB Pro/CK3mini)

S

samizoo

Noob Account
Jun 14, 2013
5
0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.94 Beta (320)
Session Started Fri Jun 14 01:09:51 2013
This is a Wow 64 process running on 4 x 64 bit CPUs
X360USB PRO detected, Version 0.20
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 9 I/O Ports.
Drive type Un-determined
Found 1 Com Ports.
Found 8 windows drives A: C: D: E: H: I: J: L:
Found 0 CD/DVD drives
Drive type Un-determined

0000: 05 80 00 30 5B 00 00 00 - 50 48 44 41 20 00 20 00 ...0[...PHDA . .
0010: 44 47 2D 31 36 40 34 41 - 20 00 20 00 20 00 20 00 [email protected] . . . .
0020: 30 30 32 31 00 00 00 00 - 00 00 00 00 00 00 00 00 0021............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 30 43 47 31 30 - 33 38 30 30 30 30 43 41 D710CG10380000CA
0070: 38 00 20 00 8. .
0000: C0 81 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 37 40 34 31 - 47 41 30 31 38 31 34 30 [email protected]
0020: 30 30 43 41 20 38 20 00 - 00 00 00 00 00 00 32 30 00CA 8 .......20
0030: 35 30 20 00 20 00 4C 40 - 53 40 20 00 20 00 47 40 50 . [email protected]@ . [email protected]
0040: 31 09 44 36 53 30 20 00 - 20 00 20 00 20 00 00 00 1.D6S0 . . . ...
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 0F 00 40 00 00 - 00 00 06 00 00 00 00 00 [email protected]
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 78 00 - 78 00 00 00 00 00 00 00 ..x.x.x.x.......
0090: 00 00 F8 00 10 00 00 00 - 02 00 00 00 60 00 00 00 ............`...
00A0: F8 00 10 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 3F 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ?...............
00C0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00D0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00E0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00F0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0100: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0110: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0120: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0130: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0140: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0150: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0160: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0170: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0180: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0190: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01B0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01C0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01D0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01E0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01F0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
......
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
............
Key: 9C05E6062F016A28EB6AD1845C578A73 verification failed !
SlimKey extraction failed!



I need Help.

This LiteOn drive works fine in XBOX
But drive Info are wierd.

Please help me out.
 
1

15432

VIP Member
Nov 14, 2010
703
68
Russia
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
......
Serial flash found with Status 0x72
Click to expand...
Did you probe MPX01 ? It's useless without power modification. If you need, I'll give manual. But it'll be easier to find PC with compatible chipset or x360usb

EDIT:
Oh, it's x360usb log. Strange log. Does the drive read games? It's possible, it was flashed with wrong key
 
Last edited:
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
15432 said:
Did you probe MPX01 ? It's useless without power modification. If you need, I'll give manual. But it'll be easier to find PC with compatible chipset or x360usb
Click to expand...
He is working with a slim drive and he is also using an X360USB Pro (look where it says port 0x0000 in the log).

OP: Have you got the "Slim" radio button checked?
 
savmod

savmod

Junior Member
Jun 10, 2013
23
0
Sheffield, United Kingdom
OP, I have managed to get drivekey using slimkey method easily using sata to usb cable, that I made myself.

Just make sure you have a compitible sata chipset before you do anything.

I made it out of an old sata to usb hdd adapter to connect your xbox 360 hdd to your pc.

I just used dremel to cut off the female power connector, just leaving the sata female data end usable, and just used some hot glue around the wires to secure them.

I have used this for many slim consoles with 0225 and 9504 drives in them.

The only trouble with this method is you have to hotswap the sata to usb cable after pressing the eject button on ck3i/ck3 twice (Eject/Close), This puts the drive into vendor mode, and then you hotswap the sata to usb with a sata cable thats connected to your PC's motherboard. Then go to dvdkey32 tab in jungleflasher, make sure dummy.bin only is ticked and I make sure in Mtkflash32 tab slim radio button is selected. Now go back to dvdkey32 tab and hit slimkey, then press no.

You should now wait and allow slimkey process to retrieve your drive key and save the dummy.bin.

Step by step listed below, of how I do it flawless everytime.

1. Power on PC
2. Load Jungleflasher
3. Connect ck3i/ck3 to Drive
4. Go to MTKflash32 tab in jungleflasher and select slim radio button
5. Connect The sata to usb adapter to your drive and other end to usb port on your pc
6. Press eject on ck3i/ck3 and fully open the drive tray and eject again to fully close the tray.
7. Now quickly unplug the sata to usb adapter from your drive and plug in your sata cable from your PC connected to your PC's motherboard.
8. You should now have status 0x72, and just need to hit slimkey button in Dvdkey32 tab to get your drive key.
9. After backing up your drive key and creating dummy.bin, just go to MTKflash32 tab and hit outro/ata reset and then intro device ID

Hope this helps ;)
 
Last edited:
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
savmod said:
OP, I have managed to get drivekey using slimkey method easily using sata to usb cable, that I made myself.

Just make sure you have a compitible sata chipset before you do anything.

I made it out of an old sata to usb hdd adapter to connect your xbox 360 hdd to your pc.

I just used dremel to cut off the female power connector, just leaving the sata female data end usable, and just used some hot glue around the wires to secure them.

I have used this for many slim consoles with 0225 and 9504 drives in them.

The only trouble with this method is you have to hotswap the sata to usb cable after pressing the eject button on ck3i/ck3 twice (Eject/Close), This puts the drive into vendor mode, and then you hotswap the sata to usb with a sata cable thats connected to your PC's motherboard. Then go to dvdkey32 tab in jungleflasher, make sure dummy.bin only is ticked and I make sure in Mtkflash32 tab slim radio button is selected. Now go back to dvdkey32 tab and hit slimkey, then press no.

You should now wait and allow slimkey process to retrieve your drive key and save the dummy.bin.

Step by step listed below, of how I do it flawless everytime.

1. Power on PC
2. Load Jungleflasher
3. Connect ck3i/ck3 to Drive
4. Go to MTKflash32 tab in jungleflasher and select slim radio button
5. Connect The sata to usb adapter to your drive and other end to usb port on your pc
6. Press eject on ck3i/ck3 and fully open the drive tray and eject again to fully close the tray.
7. Now quickly unplug the sata to usb adapter from your drive and plug in your sata cable from your PC connected to your PC's motherboard.
8. You should now have status 0x72, and just need to hit slimkey button in Dvdkey32 tab to get your drive key.
9. After backing up your drive key and creating dummy.bin, just go to MTKflash32 tab and hit outo/ata reset and then intro device ID

Hope this helps ;)
Click to expand...
The OP is using an X360USB Pro.

He needs to give us more details before we can help him further.
 
savmod

savmod

Junior Member
Jun 10, 2013
23
0
Sheffield, United Kingdom
To OP, you should'nt be having any issues using x360USB pro, as these are supposed to make everything 10 times easier, when it comes to firmware reading/writing of the drive.

My suggestion, would be to make sure you are reading the jungleflasher documentation, before using the x360usb pro.

Jungleflasher guide is noob friendly, so have a good look through that, and try obtaining the key via slimkey method again ;)
 
S

samizoo

Noob Account
Jun 14, 2013
5
0
BL4K3Y said:
He is working with a slim drive and he is also using an X360USB Pro (look where it says port 0x0000 in the log).

OP: Have you got the "Slim" radio button checked?
Click to expand...
Yes, I did. I did what manual says. It gives me same fail message...
 
frayed

frayed

DINDU NUFFIN
VIP Member
Dec 22, 2010
3,245
118
A galaxy far far away....
savmod said:
OP, I have managed to get drivekey using slimkey method easily using sata to usb cable, that I made myself.

Just make sure you have a compitible sata chipset before you do anything.

I made it out of an old sata to usb hdd adapter to connect your xbox 360 hdd to your pc.

I just used dremel to cut off the female power connector, just leaving the sata female data end usable, and just used some hot glue around the wires to secure them.

I have used this for many slim consoles with 0225 and 9504 drives in them.

The only trouble with this method is you have to hotswap the sata to usb cable after pressing the eject button on ck3i/ck3 twice (Eject/Close), This puts the drive into vendor mode, and then you hotswap the sata to usb with a sata cable thats connected to your PC's motherboard. Then go to dvdkey32 tab in jungleflasher, make sure dummy.bin only is ticked and I make sure in Mtkflash32 tab slim radio button is selected. Now go back to dvdkey32 tab and hit slimkey, then press no.

You should now wait and allow slimkey process to retrieve your drive key and save the dummy.bin.

Step by step listed below, of how I do it flawless everytime.

1. Power on PC
2. Load Jungleflasher
3. Connect ck3i/ck3 to Drive
4. Go to MTKflash32 tab in jungleflasher and select slim radio button
5. Connect The sata to usb adapter to your drive and other end to usb port on your pc
6. Press eject on ck3i/ck3 and fully open the drive tray and eject again to fully close the tray.
7. Now quickly unplug the sata to usb adapter from your drive and plug in your sata cable from your PC connected to your PC's motherboard.
8. You should now have status 0x72, and just need to hit slimkey button in Dvdkey32 tab to get your drive key.
9. After backing up your drive key and creating dummy.bin, just go to MTKflash32 tab and hit outro/ata reset and then intro device ID

Hope this helps ;)
Click to expand...
BL4K3Y said:
The OP is using an X360USB Pro.

He needs to give us more details before we can help him further.
Click to expand...
in the future please stop yourself from posting
 
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
That inquiry is f**ked up.

If you email me - [email protected] - I'd like to try something.
 
S

samizoo

Noob Account
Jun 14, 2013
5
0
15432 said:
Did you probe MPX01 ? It's useless without power modification. If you need, I'll give manual. But it'll be easier to find PC with compatible chipset or x360usb

EDIT:
Oh, it's x360usb log. Strange log. Does the drive read games? It's possible, it was flashed with wrong key
Click to expand...
It's first try flash.
 
S

samizoo

Noob Account
Jun 14, 2013
5
0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.94 Beta (320)
Session Started Thu Jun 20 21:10:41 2013
This is a Wow 64 process running on 8 x 64 bit CPUs
X360USB PRO detected, Version 0.20
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 1 I/O Ports.
Found 6 Com Ports.
Found 13 windows drives C: D: E: F: G: H: I: J: K: L: M: N: O:
Found 2 CD/DVD drives E: F:
Drive type Un-determined
Drive type Un-determined

0000: 05 80 00 30 5B 00 00 00 - 50 48 44 41 20 00 20 00 ...0[...PHDA . .
0010: 44 47 2D 31 36 40 34 41 - 20 00 20 00 20 00 20 00 [email protected] . . . .
0020: 30 30 32 31 00 00 00 00 - 00 00 00 00 00 00 00 00 0021............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 30 43 47 31 30 - 33 38 30 30 30 30 43 41 D710CG10380000CA
0070: 38 00 20 00 8. .
0000: C0 81 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 37 40 34 31 - 47 41 30 31 38 31 34 30 [email protected]
0020: 30 30 43 41 20 38 20 00 - 00 00 00 00 00 00 32 30 00CA 8 .......20
0030: 35 30 20 00 20 00 4C 40 - 53 40 20 00 20 00 47 40 50 . [email protected]@ . [email protected]
0040: 31 09 44 36 53 30 20 00 - 20 00 20 00 20 00 00 00 1.D6S0 . . . ...
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 0F 00 40 00 00 - 00 00 06 00 00 00 00 00 [email protected]
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 78 00 - 78 00 00 00 00 00 00 00 ..x.x.x.x.......
0090: 00 00 F8 00 10 00 00 00 - 02 00 00 00 60 00 00 00 ............`...
00A0: F8 00 10 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 3F 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ?...............
00C0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00D0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00E0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00F0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0100: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0110: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0120: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0130: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0140: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0150: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0160: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0170: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0180: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0190: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01B0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01C0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01D0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01E0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01F0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Sending Vendor Intro to port 0x0000
Status 0x90
Re-sending Vendor Intro:
..................................
Device Intro failed!
SlimKey extraction failed!

---------------------------------------------- 1st Slimkey Failed

0000: 05 80 00 30 5B 00 00 00 - 50 48 44 41 20 00 20 00 ...0[...PHDA . .
0010: 44 47 2D 31 36 40 34 41 - 20 00 20 00 20 00 20 00 [email protected] . . . .
0020: 30 30 32 31 00 00 00 00 - 00 00 00 00 00 00 00 00 0021............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 30 43 47 31 30 - 33 38 30 30 30 30 43 41 D710CG10380000CA
0070: 38 00 20 00 8. .
0000: C0 81 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 37 40 34 31 - 47 41 30 31 38 31 34 30 [email protected]
0020: 30 30 43 41 20 38 20 00 - 00 00 00 00 00 00 32 30 00CA 8 .......20
0030: 35 30 20 00 20 00 4C 40 - 53 40 20 00 20 00 47 40 50 . [email protected]@ . [email protected]
0040: 31 09 44 36 53 30 20 00 - 20 00 20 00 20 00 00 00 1.D6S0 . . . ...
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 0F 00 40 00 00 - 00 00 06 00 00 00 00 00 [email protected]
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 78 00 - 78 00 00 00 00 00 00 00 ..x.x.x.x.......
0090: 00 00 F8 00 10 00 00 00 - 02 00 00 00 60 00 00 00 ............`...
00A0: F8 00 10 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 3F 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ?...............
00C0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00D0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00E0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00F0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0100: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0110: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0120: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0130: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0140: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0150: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0160: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0170: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0180: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0190: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01A0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01B0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01C0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01D0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01E0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01F0: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
............
Key: 9C05E6062F016A28EB6AD1845C578A73 verification failed !
SlimKey extraction failed! I did what manual says, I checked everything...
 
You must log in or register to reply here.