ANSWERED Slimkey failed

[doktorsmurf]

So let me start by listing what I've done! I have updated jungleflasher to 0.192, i have usbpro with version 0.18, I have installed the pcb unlock to my drive and previously flashed it to lt+2.0 with little problems.

Saw that lt+3.0 was released so wanted to update my drive. Once again I followed this guide: http://team-xecuter.com/forums/showthread.php?t=67582

I get stuck on step three: 3. Now click Yes and then power cycle the drive (Turn the CK3 Pro power off then on) A little while after power cycling I get "slimkey failed" I tried to pull out and insert the cable instead of flipping the switch, no luck. I tried replacing both the usb to usbpro cable and sata cable with no luck.

So why does it not work?

I'm sure I've missed something really obvious but please help! It would be much appreciated!

Attached a screenshot of the jungelflasher window

 

[x360ccm]

is this a tx pcb.

 

[doe1200]

load dummy to source lt3.0 to target make sure both keys match intro device power cycle press spi button make sure write protect switch is set to wp1 before hitting the spi button and phat is selected on the radio button also flash to stock 1st if you need to update your dash

 

[doktorsmurf]

is this a tx pcb.

Yes

 

[doktorsmurf]

load dummy to source lt3.0 to target make sure both keys match intro device power cycle press spi button make sure write protect switch is set to wp1 before hitting the spi button and phat is selected on the radio button also flash to stock 1st if you need to update your dash

Thank you very much! Just one more question if you don't mind. I have not updated my dash nor do I currently plan to but if I would like to would I then just load dummy as source, nothing as target then just proceed. Hook it up to the internet, update, then flash it with lt+3.0? Once again thanks for the help I really appreciate it!

 

[doe1200]

load dummy to source and 0225 ofw to target make sure you press the spoof source to target so that your keys match it would be better to update to latest dash then flash to lt 3.0

 

[xXBladeXx]

no flash back to stock do update then flash to lt3 ALWAYS go back to stock before any update

 

[GhostFace606]

Start at step 7 of this guide,you have read your key info from the original Pcb...you should have your dummy bin.there is no need to re-extract it.

http://www.team-xecuter.com/forums/showthread.php?t=67582

 

[whoseanthony]

With the slims you can update the dash without having to revert to stock as the drives are locked and won't be over written.

 

[GhostFace606]

With the slims you can update the dash without having to revert to stock as the drives are locked and won't be over written.

What kind of advice is that?

I don't mean to turn this thread to sh*t,but come on now?

"ALWAYS REVERT TO STOCK BEFORE ANY DASH UPDATE"

I am thinking of contacting urbergeek to see if he can get that very quote flashing and scrolling on the main page!