Hi, I've been trying to get my keys from my 0225 drive from my RGH 360 and can't seem to extract them, I tried the x360usb, and the viacard/usb to sata trick, my first slim I didn't have the 360usb yet so i tried the via card and usb to sata cable and got my keys same type of drive too, 0225 winbound. Don't have a nand reader/writer so unless theres a program to get your key without ur nand please let me know. Any Ideas?
ANSWERED Slimkey Failed!?
- Thread starter dx5512
- Start date
rs250
Full Member
You should be able get your key from your rgh by booting zell... but I guess you need full dummy.bin? Apologies, but not sure you have all you need to pull dummy.bin from your board... probe 3?
rs250
Full Member
that is strange... when using x360USB Pro, every 16D4S I have ever tried has worked with slimkey first shot to read and create dummy.bin. have you tried the obvious like changing out usb cable, usb port, Sata cable?
Tried a different sata cable, still no luck. Gonna try re-installing the drivers, here's the JF log: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Thu Jan 19 21:39:01 2012
This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 0 Com Ports.
Found 3 windows drives C: D: E:
Found 1 CD/DVD drives D:
PortIO unloaded.
Drive is Slim Lite-On..
Drive is Slim Lite-On..
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 FF FF FF FF - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0070: FF 20 20 20 .
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
...
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
SlimKey extraction failed!
Drive is Slim Lite-On..
JungleFlasher 0.1.92 Beta (304)
Session Started Thu Jan 19 21:39:01 2012
This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 0 Com Ports.
Found 3 windows drives C: D: E:
Found 1 CD/DVD drives D:
PortIO unloaded.
Drive is Slim Lite-On..
Drive is Slim Lite-On..
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 FF FF FF FF - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: FF FF FF FF FF FF FF FF - FF FF FF FF FF FF FF FF ................
0070: FF 20 20 20 .
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
...
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
SlimKey extraction failed!
Drive is Slim Lite-On..
rs250
Full Member
do you have any older versions of JF? I had great luck with 0.1.86 and slimkey... also, I know it is kind of a obvious question but are you running as administrator?
haven't tried 1.86 yet, tried 1.90 the other day (no luck) and yes I always run as admin. Thanks!
---------- Post added at 23:19 ---------- Previous post was at 23:12 ----------
don't have 1.86 tried 1.84, 1.87 and still nothing.
---------- Post added at 23:19 ---------- Previous post was at 23:12 ----------
don't have 1.86 tried 1.84, 1.87 and still nothing.
rs250
Full Member
x360ccm
BANNED
how has the pcb been unlocked.
kamikazi or has it never been locked by a dash update.
try the slim unlock button.
you say you was able to read the fw.but no dummy.
did you save this bin file as Lite-OFW
so i take it you did a full dump of the pcb.
if that is the case then you wont need the dummy.
can you post a jf log from when you read the fw.
Just tryied to get the OFW again but it says authorization failed or something to that affect. Anyways heres the JF log: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Fri Jan 20 13:10:45 2012
This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 0 Com Ports.
Found 2 windows drives C: D:
Found 1 CD/DVD drives D:
XECUTER X360USB PRO attached.
Drive is Slim Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x90
Re-sending Vendor Intro:
.
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Invalid Status 0x0
Getting Status from port 0x0000
Invalid Status 0x0
Sending Vendor Intro to port 0x0000
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Sending Vendor Intro to port 0x0000
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Serial flash found with Status 0x72
Spi is locked, Aborting!
Sending Spi UnLock request to Port 0x0000
.......................................................................................................................................
Spi Status: 0x00
Getting Status from port 0x0000
Serial flash found with Status 0x72
Reading Drive Key.
............
Authorisation Failed!
Getting Status from port 0x0000
Invalid Status 0x50
Sending Vendor Intro to port 0x0000
Status 0x51
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Serial flash found with Status 0x72
Reading Drive Key.
............
Authorisation Failed!
JungleFlasher 0.1.92 Beta (304)
Session Started Fri Jan 20 13:10:45 2012
This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 0 Com Ports.
Found 2 windows drives C: D:
Found 1 CD/DVD drives D:
XECUTER X360USB PRO attached.
Drive is Slim Lite-On..
Sending Vendor Intro to port 0x0000
Status 0x90
Re-sending Vendor Intro:
.
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Invalid Status 0x0
Getting Status from port 0x0000
Invalid Status 0x0
Sending Vendor Intro to port 0x0000
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Sending Vendor Intro to port 0x0000
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Serial flash found with Status 0x72
Spi is locked, Aborting!
Sending Spi UnLock request to Port 0x0000
.......................................................................................................................................
Spi Status: 0x00
Getting Status from port 0x0000
Serial flash found with Status 0x72
Reading Drive Key.
............
Authorisation Failed!
Getting Status from port 0x0000
Invalid Status 0x50
Sending Vendor Intro to port 0x0000
Status 0x51
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Serial flash found with Status 0x72
Reading Drive Key.
............
Authorisation Failed!
x360ccm
BANNED
rs250
Full Member
Are you answering yes to the "send slimkey unlock command" in JF? If so don't. Try pressing no...
x360ccm
BANNED
so it had the ic drilled into.
load the first dump into jungleflasher.
dose it show your drive key.
have you got teamviewer if so then pm me your id and passcode.
load the first dump into jungleflasher.
dose it show your drive key.
have you got teamviewer if so then pm me your id and passcode.
Last edited:
don't have team viewer, but when I try to load the OFW in JF it says Parse failed!, and yes it was drilled into the chip.
no problem, contacted the orginial owner and got the files, only thing is it was dumped with a maximus lizard not a x360usb like I have, so there are more files and there named differently but I think I got it ''source_dummy.bin'' is actually the ''dummy.bin'' right? Thanks!