Hey guys,
So I recently found an old jtaggable 360 at a garage sale and decided to try my hand at a jtag. Everything was successful up to the point where I tried to create my own dash with my cpu key and nand dump via the latest J-runner tutorial on compiling without the nanddump. There was an issue reading the smc-config. I was trying to figure out what was wrong and, like a scrub, wrote the nand dump I had onto the console. Now the console still boots (Into 3 rrod error 0020) and any attempt to read the nand result in a messed up smc-config. I was thinking it was either I'm not getting the full dump or I may just have f***ed up the console. Either way I could use some help. Here's my log:
Oh also, I'm dumping via lpt.
EDIT: Sorry about that, got the issue fixed via a new dump of the nand. Good luck to anyone with the same issue
So I recently found an old jtaggable 360 at a garage sale and decided to try my hand at a jtag. Everything was successful up to the point where I tried to create my own dash with my cpu key and nand dump via the latest J-runner tutorial on compiling without the nanddump. There was an issue reading the smc-config. I was trying to figure out what was wrong and, like a scrub, wrote the nand dump I had onto the console. Now the console still boots (Into 3 rrod error 0020) and any attempt to read the nand result in a messed up smc-config. I was thinking it was either I'm not getting the full dump or I may just have f***ed up the console. Either way I could use some help. Here's my log:
Code:
===================================================Thursday, July 3, 2014 8:14:46 PM
J-Runner v0.3 Beta (4) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Extracting..
Initializing nand.bin..
Zephyr
Jtag Selected
Nand Initialization Finished
Extracting..
Saving SMC_en.bin
Saving SMC_dec.bin
Saving KV_en.bin
Saving KV_dec.bin
Saving smc_config.bin
Finished
CpuKey is Correct
Load Files Initiliazation Finished
16747
Started Creation of the 16747 xebuild image
---------------------------------------------------------------
xeBuild v1.12.659
---------------------------------------------------------------
base path changed to G:\J-Runner\xeBuild
---- { Image Build Mode } ----
building jtag image
******* ERROR: unable to find SMC config data!
**** could not read smc_config.bin (2) ****
******* ERROR: critical bootloader files are missing, cannot proceed!
***** FATAL BUILD ERROR: -1 unable to complete NAND image
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
FailedEDIT: Sorry about that, got the issue fixed via a new dump of the nand. Good luck to anyone with the same issue
Last edited:
