savah said:
if you are using firefox, there is an extension that reloads a tab however often that you want it to. :wink:
so is it going to be released?
- Thread starter FoxRacR17
- Start date
if you are using firefox, there is an extension that reloads a tab however often that you want it to. :wink:
lol i'm sry but u ppl have to much free time if ur checking this site every hour just for a bios update... like go to sleep and when you wake up it'll probably be out. like do you really need a new bios the exact second it comes out?
uhhh like yea and like stuff california boy, we like do like need a like new like bios like as soon as like it like comes out and like stuff
replace BENQ drive with HITACHI GDR-3120L
Hi, i need steps or a tutorial on how to make my spare Hitachi drive work with my 360 that had a benq in it. I have both stock firmwares and keys clearly labelled on my desktop, I use jungleflasher V 0.1.75.
The problem was i successfully flashed my benq drive with the same firmware and procedure as my last successful benq flash (which works perfect) and THIS time any game that i put in the benq drive starts up then tells me the disc is unreadable.... and now for some reason my benq drive wont even power on or open tray. So i am left with my spare hitachi drive that works perfect... but needs the BENQ key for this xbox to work. i need someone help please.
Hi, i need steps or a tutorial on how to make my spare Hitachi drive work with my 360 that had a benq in it. I have both stock firmwares and keys clearly labelled on my desktop, I use jungleflasher V 0.1.75.
The problem was i successfully flashed my benq drive with the same firmware and procedure as my last successful benq flash (which works perfect) and THIS time any game that i put in the benq drive starts up then tells me the disc is unreadable.... and now for some reason my benq drive wont even power on or open tray. So i am left with my spare hitachi drive that works perfect... but needs the BENQ key for this xbox to work. i need someone help please.
Re: replace BENQ drive with HITACHI GDR-3120L
Good tutorial in downloads . Very Noob freindly
http://www.360mods.net/index.php?name=Downloads&file=details&id=95
Personally I would buy a Liteon . The 79 wont have much life left in it .
Good tutorial in downloads . Very Noob freindly
http://www.360mods.net/index.php?name=Downloads&file=details&id=95
Personally I would buy a Liteon . The 79 wont have much life left in it .
Re: replace BENQ drive with HITACHI GDR-3120L
I still cant get the hitachi drive to read games in my xbox 360, i have spoofed it as a benq WITH the benq dvd key that matches the mobo in jungleflasher.... im having alot of issues here... maybe someone could remote assistance me?
I still cant get the hitachi drive to read games in my xbox 360, i have spoofed it as a benq WITH the benq dvd key that matches the mobo in jungleflasher.... im having alot of issues here... maybe someone could remote assistance me?
Re: replace BENQ drive with HITACHI GDR-3120L
for example, if you are getting the "open tray" issue, it could be an issue with your burning of games, or the hitachi may require the POT tweak
give us a little more information about what is happeningfruitchew said:
for example, if you are getting the "open tray" issue, it could be an issue with your burning of games, or the hitachi may require the POT tweak
Re: replace BENQ drive with HITACHI GDR-3120L
i just dont think i am doing it right.... the steps i took was first dump both stock firmwares for both drives, get the hitachi into mode b V78 (which the drive is) i installed the jungleflasher firmware ixtreme kit, i loaded the benq OFW into SOURCE, and the hitachi OWF into target, i spoof the benq KEY to the target, then i go back to the hitachi tab, i click "flash iXtreme" like jungleflasher sais to before i do anything else with the drive. it goes through well, then i click "auto spoof" and it goes through successfully.... so i go check my drive now in jungleflasher- the hitachi now shows up as a benq WITH the benq key that matches the mobo.... And my games are burnt successfully, i have another 360 that i use to play backed up games and its a benq and runs perfect.
***when i flashed ixtreme, i selected my drives proper file which was ix151-78-4e10.bin that matched my hitachis OFW.
i just dont think i am doing it right.... the steps i took was first dump both stock firmwares for both drives, get the hitachi into mode b V78 (which the drive is) i installed the jungleflasher firmware ixtreme kit, i loaded the benq OFW into SOURCE, and the hitachi OWF into target, i spoof the benq KEY to the target, then i go back to the hitachi tab, i click "flash iXtreme" like jungleflasher sais to before i do anything else with the drive. it goes through well, then i click "auto spoof" and it goes through successfully.... so i go check my drive now in jungleflasher- the hitachi now shows up as a benq WITH the benq key that matches the mobo.... And my games are burnt successfully, i have another 360 that i use to play backed up games and its a benq and runs perfect.
***when i flashed ixtreme, i selected my drives proper file which was ix151-78-4e10.bin that matched my hitachis OFW.
Re: replace BENQ drive with HITACHI GDR-3120L
With hitachi ,you dont use firmware32 like mtk based drives,
you dont use source and target,and you dont choose what firmware to flash,jungleflasher chooses,the jungleflasher hitachi firmware needs to be the firmware folder.
the only time you go into the firmware32 tab is to use autospoof ,and even then only a source firmware is loaded,there is no target loaded.
go to hitachi tab,
modeb the drive,it will be showing as benq atm
restore the drive
flashix and jf will put ix on the drive
go to firmware32 load the benq ofw in source area,nothing
in the target.
back to hitachi tab
now click autospoof.
Please note hitachis are notoriously poor at reading burnt
discs,please clean disc,disc unreadable,open tray may require pot tweak.
With hitachi ,you dont use firmware32 like mtk based drives,
you dont use source and target,and you dont choose what firmware to flash,jungleflasher chooses,the jungleflasher hitachi firmware needs to be the firmware folder.
the only time you go into the firmware32 tab is to use autospoof ,and even then only a source firmware is loaded,there is no target loaded.
go to hitachi tab,
modeb the drive,it will be showing as benq atm
restore the drive
flashix and jf will put ix on the drive
go to firmware32 load the benq ofw in source area,nothing
in the target.
back to hitachi tab
now click autospoof.
Please note hitachis are notoriously poor at reading burnt
discs,please clean disc,disc unreadable,open tray may require pot tweak.
Re: replace BENQ drive with HITACHI GDR-3120L
when i restore, do i click set checksum? and when i am done flashing do i set it again? or do i not even use that feature..?
when i restore, do i click set checksum? and when i am done flashing do i set it again? or do i not even use that feature..?
Re: replace BENQ drive with HITACHI GDR-3120L
so now when people make the mistake of trying to manually select their firmware, jungleflasher ignores them and selects the firmware by itself
what you should do is flash ixtreme 1.51 to the hitachi, load up the benq firmware in the source section of firmware 32 tab, then press autospoof in the hitachi side
easy as pie
my guess is that you need a POT tweak, as i said before
luckily, the last couple revisions of JF have fixed the potential of people trying to flash from mtk32 tab...its no longer possibleturny said:
so now when people make the mistake of trying to manually select their firmware, jungleflasher ignores them and selects the firmware by itself
what you should do is flash ixtreme 1.51 to the hitachi, load up the benq firmware in the source section of firmware 32 tab, then press autospoof in the hitachi side
easy as pie
my guess is that you need a POT tweak, as i said before
Re: replace BENQ drive with HITACHI GDR-3120L
kk i folowed all directions noted, when i flashix, JF automatically loads ix151-78-4e10.bin into the TARGET of that firmwaretool 32 tab, and theres nothing in the source except some incorrect dvd keyturny said:
Re: replace BENQ drive with HITACHI GDR-3120L
did you read what i posted?
it doesn't matter what the key is, you flash ixtreme first, THEN SPOOF YOUR KEYS AND DRIVE
if you have the drive flashed, just load up the benq firmware into the source, then press autospoof in the hitachi tab
did you read what i posted?
it doesn't matter what the key is, you flash ixtreme first, THEN SPOOF YOUR KEYS AND DRIVE
if you have the drive flashed, just load up the benq firmware into the source, then press autospoof in the hitachi tab
Re: replace BENQ drive with HITACHI GDR-3120L
yea i read it, and i did exactly that after the previous attempt failed, i just hvant posted it yet so here it is... i did EXACTLY that, i know the BENQ KEY that matches the MOBO-and its in SOURCE and i have the automated ix firmware for the hitachi in target, i went back to the hitachi tab and clicked autospoof. went well.... BUT when i went to test the console, everything still sais, this is an xbox 360 game please put it into an xbox 360 console. I dont know what is going on here i know i have the correct key off the benq drive i am swapping for a hitachi and by these directions i did follow them best i could.joesinger47 said: