ANSWERED Solder Points For Postfix Adapter?

[AffinitiveKuma]

Is there a tutorial or can someone tell me where I solder the postfix adapter to the board? Is it just to the two components that line up in between the two pads?

 

[BL4K3Y]

You can anchor the adapter to the caps.

Those solder points were included in the adapter's design so that it could be permanently installed in RGH consoles.

 

[AffinitiveKuma]

You can anchor the adapter to the caps.

Those solder points were included in the adapter's design so that it could be permanently installed in RGH consoles.

So basically I just solder the two metal contact points on each side of the cap to the metal contacts on the adapter? On these two points?

 

[BL4K3Y]

That is correct.

Solder the anchor points to the caps.

 

[NumbNess]

could you show a picture of how it looks when its soldered? because i still dont understand.

 

[Krafter]

could you show a picture of how it looks when its soldered? because i still dont understand.

You'll have to do some googling yourself. Although, you could use hot glue to nail it down. I've done that before and it works great. A little easier to pull off if ever need too. Just add a little isopropyl alcohol and the glue come right off with no damage to the Postfix or to the caps.