[SOLVED]Switch Ver.6.2 won't load CFW

[Just4fun115]

guys i bought a switch which has Ver. 6.2 . bought sxPro and did nand + emunand . when i enter rcm it says EmuNAND enable(did all the activation stuff ). now i click on Boot CFW , the screen turns black. the NINTENDO logo appears and after that nothing happens. I wait 1 min the hold the power button and the OFW starts.
what am i doing wrong?
Edit. when i'm in the sxos screnn ( where i can choose between Boot CFW, OFW and Options) i remove the jig but let the dongle in . Thats the right way to do it or ?
thx 4 help
Edit: i formated the sd card by the switch, put everthing on it like boot, license, homebrew.BUT not emunand. It worked! So i put emunad also back on the sd card -> same problem

So now i formated the sd via switch. Then inserted the card in my pc and out everthing on it i should look like this just without the sxos folder http://de.tinypic.com/r/pyogn/9
Then i started rcm choose cr3ate emunand waited..... and it worked .
Thx for help guys

 

[nofeloniesyet]

did you remove license-request.dat from sd card? once sx is up u can remove dongle.

 

[ZeroSebastian]

I have the same issue. I followed the instructions of the provided manual and bought and created the license. When i inject the payload the CFW should boot automatically. But the switch just stays black and the USB device gets disconnected from the PC. When holding down the volume + button while injecting the options menu is successfully loaded. But neither the original FW nor the CFW will boot from this menu. I did not create EmuNand could this be the issue?
I have also checked out this thread if my switch is hackable: https://team-xecuter.com/community/...h-is-currently-unhackable-august-2018.127786/
I get this output in cmd:

So it certainly shows the 0x7000 but there is some output missing.

So I thought is my switch patched or am I just doing something wrong?
Thank you in advance!



*****************************************Edit***********************************************

I fixed it! For any reason I had downloaded the SXOS_v2.0.1 (idk why). With the Sd card formatted by the switch itself and the proper files it works now. Great work!

 

[Just4fun115]

did you remove license-request.dat from sd card? once sx is up u can remove dongle.

Yes only have license.dat , which i got from sxos site after the activation