Some weird problem on X3

[zzwyxh]

I soldered X3 and flashed bios 1959, installed evoX, everything worked as expected.

Only one problem, today I moved the xbox from one room to another room (which means the xbox is power off, power cable unpluged).

Then when I start XBox again, it automatically boots MS Dash and the X3 led is not on. And it directly goes to the setting menu (behaving as an unmoded XBox).

After I did the setting, the X3 LED is on (in red as X3 is disabled) and then I can start with X3 as expected.

Is this supposed to behave like this? Or there is some problem on my soldering?

Thanks a bunch.

zzwyxh

 

[zzwyxh]

BTW. I got XBox 1.6 and X3 CE w/ LPC rebuild PCB.

 

[drewdog77]

There is a setting in X3 Config that will make the box boot to the MS dash if the clock has been reset. This allows you to set the clock using the MS dash. I would have to say this is probably normal.

 

[XCronus]

does it work now?