Someone gave me a Xecuter CK3 Lite and Benq Drive...Where do I start?

[raebran]

Whats up guys

I was at my friends house and see this thing hanging out his computer from a molex connector and a DVD drive on top of the tower, which is connected to a SATA cable inside the computer and the thing that was hanging out...it was a Xecuter CK Lite.

He gave it to me because he said he hasn't had the time to use it recently. From what I've read so far, it seems that the thing is pretty old, but I'm hoping I can still make use of it.

I've read through the Jungle Flash Pdf, as well as a few other tutorials but I am totally lost. Being the Benq drive came out of another xbox (I'm assuming, though I don't know the history of the drive), where do I even start? I'm so confused right now. I can connect everything to my PC the way he had it connected to his, but I'm still totally lost after that, especially since I know that everything isn't gonna match up between the Xbox and the drive.

Please help me get started. Thanks!

 

[darkweezil]

Your going to have to be more specific bud.
What are you wanting to do with the BenQ drive?
Are you wanting to pull a key off another drive and flash it to the BenQ?

 

[raebran]

I want to be able to put the drive that was given to me into a 360 I have, and I assume be able to match the drive keys with the xbox. I want to be able to create/play backups but I just don't know where to start

 

[darkweezil]

What drive is in the console that you have?
We need to know which drive your console has so that you can dump the key from it.
Thats the first step.
Once we establish that we can move forward.

 

[raebran]

What drive is in the console that you have?
We need to know which drive your console has so that you can dump the key from it.
Thats the first step.
Once we establish that we can move forward.

The drive in the console is a Liteon DG-16D2S

 

[darkweezil]

Your going to need to make a probe in order to retrieve the key.

Here is the link to that.
http://www.ixtreme.net/ixtreme-lt-l...orking-probe-phat-liteon-drive-very-easy.html



Here is a video for dumping the key

[video=youtube_share;N-jeBg_hOuc]http://youtu.be/N-jeBg_hOuc?t=11s[/video]


Once you have done that you can move on to the next step.

 

[raebran]

Your going to need to make a probe in order to retrieve the key.

Here is the link to that.
http://www.ixtreme.net/ixtreme-lt-l...orking-probe-phat-liteon-drive-very-easy.html



Here is a video for dumping the key

[video=youtube_share;N-jeBg_hOuc]http://youtu.be/N-jeBg_hOuc?t=11s[/video]


Once you have done that you can move on to the next step.

Thanks! I'll start on this tomorrow

 

[oO Elite Oo]

Just STOP!

where do you start? start reading the JungleFlasher Tutorial pdf that comes with the software, quit being lazy and apply yourself.

 

[raebran]

Just STOP!

where do you start? start reading the JungleFlasher Tutorial pdf that comes with the software, quit being lazy and apply yourself.

If you actually read my post then you'd see I've done that. I'm confused, so either help or quit replying

 

[darkweezil]

The pdf does contain a sh*t ton of helpful information, but if there is any confusion feel free to PM me.
I do not mind helping.

 

[meads1970]

If you actually read my post then you'd see I've done that. I'm confused, so either help or quit replying

well I would say going by all the questions you havnt a clue what your doing let alone what you want to do so take the advice and stop before you balls summot up

 

[BL4K3Y]

If you actually read my post then you'd see I've done that. I'm confused, so either help or quit replying

I can confirm that everything you need to know is covered in the JungleFlasher PDF.

It explains how to power your drive (that's what the CK3 is for) and it also explains how to dump the firmware/drive key from a drive.

Follow the flowchart and you shouldn't have a problem.