Ok I have 2 JR Programmers so its easy for me to determine if I am doing something wrong or if the fault is with the JR Programmer. Ok now to what I see is weird.
lets call the JR Programmers A and B. Ok
A - when connected to the 360 the green led will blink and if not I hit the reset button a few times until it begins to blink. Once the green LED starts to blink I connect it to the USB on the PC and windows will recognize it right away and I can read/write the nand with no issues.
B - Green LED will not blink no matter what I do it just stays solid so I connect it to the USB on the PC and hit reset on the JR Programmer until Windows recognizes it properly and I can then read/write the nand .
When I have compared A and B I have used the same 360 with the same wired install the only thing different through out is the programmer being used. So does anyone know what could be the cause of the difference in the programmers?
Thanks
lets call the JR Programmers A and B. Ok
A - when connected to the 360 the green led will blink and if not I hit the reset button a few times until it begins to blink. Once the green LED starts to blink I connect it to the USB on the PC and windows will recognize it right away and I can read/write the nand with no issues.
B - Green LED will not blink no matter what I do it just stays solid so I connect it to the USB on the PC and hit reset on the JR Programmer until Windows recognizes it properly and I can then read/write the nand .
When I have compared A and B I have used the same 360 with the same wired install the only thing different through out is the programmer being used. So does anyone know what could be the cause of the difference in the programmers?
Thanks
