RGH SOS Build retail Trinity CB 9188

[ampac22]

hey gents ,
I a, new here and I hope we will spend best time togather ,
Today I was trying to build new retail for xbox slim trinity with cb 9188 AND LDV 10
fuse line as below
fuseset 02: f0ff000000000000
fuseset 07: ffffffffff000000
fuseset 08: 0000000000000000

as i have read I should build image with dash within 8498- 14699 I have tried all possibly but there is no dash get it boot please are someone able to provide me more information in witch dash to choose,
fct , kv , smc config and clean smc are used with j-runner
thanks in advance,

 

[gavin_darkglide]

If I am reading that right, the problem is you are building for the wrong CB. lol. Try building latest retail dash with ldv of 10, and the KV, SMC, FCRT, and SMC config from that console.

 

[ampac22]

If I am reading that right, the problem is you are building for the wrong CB. lol. Try building latest retail dash with ldv of 10, and the KV, SMC, FCRT, and SMC config from that console.

Try building latest retail dash with ldv of 10??? <ich one ??

and the KV, SMC, FCRT, and SMC config from that console.[/QUOTE] I used the extracted fil only clean smc add to that folder

 

[gavin_darkglide]

If I am reading that correctly, if 14699 doesnt work, than try 14717, and if that doesnt work, try 15572. All of the latest dashboards are still using the CB from 15572, it hasnt been updated since then. If none of them work, than either you have the wrong KV, or there is something wrong with the console.

 

[ampac22]

If I am reading that correctly, if 14699 doesnt work, than try 14717, and if that doesnt work, try 15572. All of the latest dashboards are still using the CB from 15572, it hasnt been updated since then. If none of them work, than either you have the wrong KV, or there is something wrong with the console.

I don't have any luck with this console with rgh image it boot normaly , but no luck for retail I have tried all possible dash. I don't know where is the mater ????

 

[john mathews]

I'm assuming this is your original kv . If so I can make you one very simple

 

[ampac22]

I'm assuming this is your original kv . If so I can make you one very simple

It will be glad , so tell me do you have email to provide you rgh image with cpu key,
My email is [email protected]

 

[gavin_darkglide]

If you cant make a nand image, than you should not be modding any console. it is as simple as that. Your problem is you are making the wrong dash, you misread the fuseset for the CB. There are 3 dashboards that you need to try. if 14699 didnt work, which it wouldnt with the cb you have, than you need to build the next one. And honestly, you need to build 15574 or higher with the CB your console is on. If you can build 14699, you can take that image, and build 15574. it isnt hard.

 

[ampac22]

If you cant make a nand image, than you should not be modding any console. it is as simple as that. Your problem is you are making the wrong dash, you misread the fuseset for the CB. There are 3 dashboards that you need to try. if 14699 didnt work, which it wouldnt with the cb you have, than you need to build the next one. And honestly, you need to build 15574 or higher with the CB your console is on. If you can build 14699, you can take that image, and build 15574. it isnt hard.

Thanks,
I didn't say that I can't build any retail I have already done many corona but for this Trinity is the first one , for what you say I have tried all dash you have suggested to mebut there is no luck, I don't know if I did something wrong ?? but the console still boot rgh image no problem,
as it shown the fuset line 02 we have F0FF so we have the 4 position the dash should be 15572 and above following that code:
Code:
So dump your e-fuses using XeLL and check fuse line 02.

Fuse line 02 looks like this 0F00000000000000

The most important thing there is last F's number. In my example, last F is placed in 2nd position.

So the idea is you can determine the dash needed depends on that positon!

Phat:

pos <= 5 ---> 7371 and below.
5 < pos <= 7 ---> 8498 - 14699.
7 < pos <= 10 ---> 14717 - 14719.
10 < pos ---> 15572 and above.

Slim:

pos <= 2 ---> 14699 and below.
2 < pos <= 3 ---> 14717 - 14719.
3 < pos ---> 15572 and above.Code:
So dump your e-fuses using XeLL and check fuse line 02.

Fuse line 02 looks like this 0F00000000000000

The most important thing there is last F's number. In my example, last F is placed in 2nd position.

So the idea is you can determine the dash needed depends on that positon!

Phat:

pos <= 5 ---> 7371 and below.
5 < pos <= 7 ---> 8498 - 14699.
7 < pos <= 10 ---> 14717 - 14719.
10 < pos ---> 15572 and above.

Slim:

pos <= 2 ---> 14699 and below.
2 < pos <= 3 ---> 14717 - 14719.
3 < pos ---> 15572 and above.


Try building latest retail dash with ldv of 10, and the KV, SMC, FCRT, and SMC config from that console. as you have said we can't build any dash without clean smc

 

[gavin_darkglide]

If it doesnt boot the console will give you an error code, what is that code, it might give another direction to look.

 

[ampac22]

If it doesnt boot the console will give you an error code, what is that code, it might give another direction to look.

secondery error was 0022

 

[gavin_darkglide]

Are you sure you have the original KV/FCRT for the console? If none of those dashboard versions work with the console, this would be my next guess, in which case the console will never work retail again, especially if it will still boot freeboot.