Sound not working after 1.6 X3 install

[Xecuter3]

Ok, my friend has a 1.6 xbox, and I modded it with an Xecuter 3, and the 1.6 pcb rebuild. After we installed it, the sound for anything doesnt work anymore. What would this point to? Modchip? Pinheader? A/V output? The video works fine, just the audio doesnt.
Help would be greatly appreciated.
Thanks
-Xecuter3

 

[Martin C]

The lack of sound is due to a broken trace on the underside of the board. Check around the LPC and hopefully you should see this. I've had this before and I may actually get round to taking a photo of said trace...

Martin

PS - can you change your username to something other than Xecuter3? Thanks.

 

[Xecuter3]

how do i change my username?
can you get that pic up?
ive heard you can have the sound work with digital things (HDTV, svideo, etc)
ive also heard about fixing the 5v trace.
any leads?
thanks

 

[Martin C]

how do i change my username?
can you get that pic up?
ive heard you can have the sound work with digital things (HDTV, svideo, etc)
ive also heard about fixing the 5v trace.
any leads?
thanks

Go into "My Account" to change username.

I can't get the pic - sorry. I thought I had it but I don't. It's definitely a trace issue though.

Martin

 

[Xecuter3]

ok,where is the trace near? do i have to take off the pcb rebuild to see if its broken?
how bout a number on the mobo?
thanks

 

[ryank401]

search!

 

[halomaster7777]

Martin C last time I checked you couldnt change your name. I wish that was an option since I would change my name in a instance

 

[Martin C]

Martin C last time I checked you couldnt change your name. I wish that was an option since I would change my name in a instance

You're quite correct

You used to be able to - I changed my name in the past and thought you still could do this.

Sorry!

Martin

PS The traces to look at are directly above the LPC, when the board is orientated so the LPC is the closest thing to you.

 

[Xecuter3]

ok, i just tried it, it worked with an HDTV pack using the optical output.
sorry, i dont understand, do i have to take the lpc rebuild off to see the trace?
thanks

 

[Martin C]

ok, i just tried it, it worked with an HDTV pack using the optical output.
sorry, i dont understand, do i have to take the lpc rebuild off to see the trace?
thanks

The optical output wouldn't be affected by this trace fault.

Yes, you would need to remove the rebuild PCB so it's up to you if you want to venture into this.

Martin

 

[tranhgiang]

I have the same problem on v1.6 with Xecuter 2.6 Lite. I don't know it's the eeprom or the setting or the mobo cause I have tried reflash bios, eeprom and I can't find anything that don't look normal on the mobo. Using avalaunch switching the settings around I sometime can get sound for a few minutes or shorter but then it gone again.

Can you help me Martin ?

 

[Xecuter3]

i dont mean to be annoying or anything, but do you think you could point out the trace on one of the pictures in your tutorials?

again- i dont mean to be a bitch, i just want to be prepared for the fix im doing tomorrow.

if you could that would be great
thanks[/img]

 

[Martin C]

Ok - this is purely from memory, so forgive me if it's not correct.

check this out:

http://www.xbox-guru.pwp.blueyonder.co.uk/images/nosoundtrace.jpg

This trace was broken on an Xbox I had in. Like most stuff I get my way, it comes in, gets repaired and goes out again. I'm 99% sure it's the right trace.

Martin

 

[Xecuter3]

thank you very much
im going over to his house right now to remove the lpc and check out that trace.
ill let u guys know what happens
thanks

 

[ReMix]

Reported Post by joesinger47

joesinger47 has reported a post.

Reason:

this guy sells copies of games

Post: Nor Cal mods Centralcoastmods
Forum: USA modders
Assigned Moderators: N/A

Posted by: JPOrtiz831
Original Content:

Mod your xbox 360 Any drive or version Ill even do the 93450c v2 series. All except shiny black slim(althought im in the process of getting the tools for this too.

Very fast paypal trusted send it back to you the same day.

I guarantee fastest and cheapest price with the best quality mods ill mod your xbox 360 with such precision that none of the warranty stickers get touched meaning your warranty is still good with microsoft.

I got many xbox 360s laying around brand new if something happens to one of yours i will replace it with mine no problem.

Expert soldering skills can do the 93450c v2series in less than 25 minutes.

Email me [email protected]

I also softmod PS3 and Wii

Backup included with every 360 mod as well as wii and ps3.

Contact me i give 150% to make sure customer is satisfied.

if your far away just mail me the dvd drive and ill send it back same day

Also i have usb jtag nt and usb bdm nt.

 

[jonesfish]

sorted

 

[romracer]

anytime someone blatantly advertises piracy you edit the post by deleting all the text and have big letters - and give an infraction piracy advertising which is a perm ban (let me know if you dont know how to do it) - and then close the thread. This sends a clear warning out to other users.

PERMA BANNED FOR ADVERTISING PIRACY