SPUTNIK360 SWITCH & PROBE - Instructions

dragontm

VIP Member
Oct 25, 2009
898
0
kent uk
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

Im having a little trouble if someone can help i unlocked my pcb with the sputnik probe but im not sure what do do next i powered off the ck3 and repaired the trace and cut it back on so now what and this is the status i got

Sending Device ID request to port 0x0000
Spi Status: 0x8C
.................
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Your board is unlocked, now you follow normal options to flash, read your key, if that fails do what i did as i got an error, go to the slimkey bit and re read the key, then go to the firmware tool, it should of auto loaded 1.91, save the key, and then go back to MTK Flash 32 and Write. you may need to intro first, without the sputnick probe. after write it will verify .

last thing to do is lock the spi, press ctrl & shift and F11.

but really dude the jf tutorial says it all.

sorry if it seems a little confusing what i wrote but im on cloud nine, recieved my switch today, and bam first Slim, ohhh yehhh
 

ataroreh8132

VIP Member
Apr 4, 2010
296
0
Virginia
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

Mee too, i can't get to unlock my 0401 with the probe can someone help?

I will post a pic of my cut on the board and let me know if its fine?:(
 

N.E.Modz

VIP Member
Sep 27, 2009
2,297
68
A.K.A daleh43
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

Im having a little trouble if someone can help i unlocked my pcb with the sputnik probe but im not sure what do do next i powered off the ck3 and repaired the trace and cut it back on so now what and this is the status i got

Sending Device ID request to port 0x0000
Spi Status: 0x8C
.................
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
correct status mate, just intro the drive again and click read

dale:wink:
 

dragontm

VIP Member
Oct 25, 2009
898
0
kent uk
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

but when i do intro again the spi s/w comes up again
then you did not hear the beep, or you locked it again.

Looks like you need to start again.

---------- Post added at 21:31 ---------- Previous post was at 21:28 ----------

one thing i will say is yes your cut has done the job ( break the trace) however it looks a bit to large for me and will be a nightmare when you want to solder it back together again.

Can you put your JF Log on here please
 

ataroreh8132

VIP Member
Apr 4, 2010
296
0
Virginia
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

Its just keep giving me a bunch of dots.......after i hit yes with the probe!

JungleFlasher 0.1.86 Beta (267)

Session Started Wed Aug 31 16:35:56 2011



This is a 32 bit process running on 2 x 32 bit CPUs

X360USB PRO detected, Version 0.18



Found 1 I/O Ports.

Found 0 Com Ports.

Found 3 windows drives C: D: E:

Found 1 CD/DVD drives E:



Sending Vendor Intro to port 0x0000

Status 0x51

Re-sending Vendor Intro:

.....

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x8C

...............................................................................................................................................................................................................................................................................................
 

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,261
0
California, USA
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

have you tried different ohm settings on the probe ?

did you start with 10 ohms ?

is the LED lit up when you connect ?
 

Rock

VIP Member
Aug 11, 2006
205
0
Spartanburg, SC
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

ok i got it it seems i didnt have to repair the trace untill i was done i wrote to it before i repaired the trace and plays burnt games now.

Now on my other liteon drive 0225 when i hit intro it just goes straight to vendor mode but i cant write to it i dont even get the status spi stuff anymore and this is without probing at all so anyone know how to fix that..lol

---------- Post added at 13:56 ---------- Previous post was at 13:51 ----------

sorry says no drive detected as i wiped the firmware before by accident

---------- Post added at 13:58 ---------- Previous post was at 13:56 ----------

but i have my orig key
 

ataroreh8132

VIP Member
Apr 4, 2010
296
0
Virginia
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

Yes, it lid up green and im not sure if i set it to 10 ohms correctly but the switch on #3 is toward the 10 ohms between 5 and 15, all the other are toward there #'s
 

dragontm

VIP Member
Oct 25, 2009
898
0
kent uk
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

ok i got it it seems i didnt have to repair the trace untill i was done i wrote to it before i repaired the trace and plays burnt games now.

Now on my other liteon drive 0225 when i hit intro it just goes straight to vendor mode but i cant write to it i dont even get the status spi stuff anymore and this is without probing at all so anyone know how to fix that..lol

---------- Post added at 13:56 ---------- Previous post was at 13:51 ----------

sorry says no drive detected as i wiped the firmware before by accident

---------- Post added at 13:58 ---------- Previous post was at 13:56 ----------

but i have my orig key
then just load up in firmware tool and save lt 1.91 then go back to MTK and intro, and then write, it should work i had this issue earlier today and that's what i did
 

Rock

VIP Member
Aug 11, 2006
205
0
Spartanburg, SC
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

no dice i can get it in vendor use the slim option but it dont write it says writing then reading fails drive wont open
 

ataroreh8132

VIP Member
Apr 4, 2010
296
0
Virginia
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

Yes, it lid up green and im not sure if i set it to 10 ohms correctly but the switch on #3 is toward the 10 ohms between 5 and 15, all the other are toward there #'s
Sorry for that big ass pic, don't know how to resize the picture using photobucket?

 

dragontm

VIP Member
Oct 25, 2009
898
0
kent uk
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

yeh thats on 10ohm which is the recommended so should be fine

---------- Post added at 22:08 ---------- Previous post was at 22:07 ----------

no dice i can get it in vendor use the slim option but it dont write it says writing then reading fails drive wont open
what tools you using?
 

ataroreh8132

VIP Member
Apr 4, 2010
296
0
Virginia
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

still unlock :[

---------- Post added at 14:13 ---------- Previous post was at 14:11 ----------

win vista, X360USB PRO, SPUTNIK360 probe!

---------- Post added at 14:14 ---------- Previous post was at 14:13 ----------

still unlock :[

---------- Post added at 14:13 ---------- Previous post was at 14:11 ----------

win vista, X360USB PRO, SPUTNIK360 probe!
and JF 1.86

---------- Post added at 14:14 ---------- Previous post was at 14:14 ----------

I powerered on with CK3 PRO

---------- Post added at 14:22 ---------- Previous post was at 14:14 ----------

I know the probe work bcuz i did a 0272 yesterday and unlocked it!

---------- Post added at 14:23 ---------- Previous post was at 14:22 ----------

Do you think that the 0401 its not unlockable?
 

TilVl

VIP Member
May 11, 2011
1,383
0
Re: SPUTNIK360 SWITCH & PROBE + X360USB PRO + New JungleFlasher = Easy ;)

Do it the manual way and see.