stubbon falcon

XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
hi guys i have a falcon that is been stubbon i carnt get it to boot xell i have tried all 18 dips i have the 470 setting and the aud_clap wire and what happens basically it either wont boot or gives 3 red lights

Console Type: (Falcon)
NAND size: 16
Dashboard version: e.g 2.0.15574
CB version: e.g 5774

Was the console working before you started: Y


DSCF1204.JPGDSCF1205.JPGDSCF1206.JPGDSCF1223.JPGDSCF1226.JPGDSCF1227.JPGMy Rater Screenshot.png

i will post the rater
 
Last edited:
Antalpromille

Antalpromille

VIP Member
Aug 4, 2011
3,146
0
Borås, sweden
looks like you damaged your R-jtag board (missing a voltage pad).
post the logs and post pictures of the rest of your install.
 
Nadles

Nadles

VIP Member
Jun 2, 2013
244
0
Virginia Beach
How exactly did you write xell? When you switched to Aud-Clamp did you select the Aud-Clamp Check Box and Re-Write Xell to the first 50 blocks? We need your J-Runner Logs and Rater if you have it.

Also I've found it preforms better for CR3 Pro and R-Jtag when it is in the Cage. You don't have your motherboard in the cage. You have a little exposed wire as well on several points on the R-Jtag board. Do I think that would stop it from booting completely or give you 3 RROD? No I don't but I find it doesn't help in any matter.
 
Last edited:
XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
Nadles said:
How exactly did you write xell? When you switched to Aud-Clamp did you select the Aud-Clamp Check Box and Re-Write Xell to the first 50 blocks? We need your J-Runner Logs and Rater if you have it.

Also I've found it preforms better for CR3 Pro and R-Jtag when it is in the Cage. You don't have your motherboard in the cage. You have a little exposed wire as well on several points on the R-Jtag board. Do I think that would stop it from booting completely or give you 3 RROD? No I don't but I find it doesn't help in any matter.
Click to expand...
no sorry i made this thread after shutting j-runner dwn
 
Nadles

Nadles

VIP Member
Jun 2, 2013
244
0
Virginia Beach
It's not outside the Logs Folder?

What wiring are you currently using as Scott1503 Stated above. If you are using AUD-Clamp you need to Bridge 1-3.

And did you ever Re-Write Xell after you did change the wiring as I previously asked.

You have to Re-Write it for the different wiring.
 
XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
Nadles said:
It's not outside the Logs Folder?

What wiring are you currently using as Scott1503 Stated above. If you are using AUD-Clamp you need to Bridge 1-3.

And did you ever Re-Write Xell after you did change the wiring as I previously asked.


You have to Re-Write it for the different wiring.
Click to expand...
yes but its has my hole jr-runner log and i have made many consoles and i will try re-wrighing it and yes i have now bridge 1-3
 
XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
jsinger47 said:
Your POST output has a bit of garbage in it.

Definitely resolder your POST QSB.

Have you tried all three voltage options?
Click to expand...
i dont want to disturb the post qsb as i have before and they are a pain and it has good conections as this has had xell before from the person before and i know cos i made it and it was for a friend and he damaged one of the point it was a wire job with the diodes and he tried the alternet point and damged that so thats why i am using the qsb and now it nothing but hassle

so nothing wrong with post qsb he did not touch that is promised and i can tell its my soldering

yes i have tried every voltage
 
jsinger47

jsinger47

Troll Eating Dogs
Feb 6, 2011
8,133
128
Grand Rapids, MI
XxGLITCH3RSxX said:
i dont want to disturb the post qsb as i have before and they are a pain and it has good conections as this has had xell before from the person before and i know cos i made it and it was for a friend and he damaged one of the point it was a wire job with the diodes and he tried the alternet point and damged that so thats why i am using the qsb and now it nothing but hassle

so nothing wrong with post qsb he did not touch that is promised and i can tell its my soldering

yes i have tried every voltage
Click to expand...
Yep, you definitely know more than me about modding Xboxes.

My apologies for attempting to correct you.

In the case of a spelling error, I blame Tapatalk.
 
  • Like
Reactions: BL4K3Y
XxGLITCH3RSxX

XxGLITCH3RSxX

VIP Member
Jun 22, 2012
186
0
England
BL4K3Y said:
A good POST output for R-JTAG starts at 10 through to 1E and then to 20-21.

Apply some flux and a a bit of solder to each pad.
Click to expand...
hey i touch up the points with fulx and solder

i removed the aud clap to try that

i solded that point i missed on the jtag qsb

now i get e79 on dips 7-2

what should i do
 
M

mrdrifta

VIP Member
Jan 31, 2011
325
0
New Zealand
XxGLITCH3RSxX said:
hey i touch up the points with fulx and solder

i removed the aud clap to try that

i solded that point i missed on the jtag qsb

now i get e79 on dips 7-2

what should i do
Click to expand...

Now you need to solder the JTAG qsb correctly by folioing the installation guides. E79 means its glitching but can't get further because of a jtag qsb issue, i.e. its not soldered on or soldered incorrectly. The guide makes it very clear what needs to be soldered where, etc.
 
You must log in or register to reply here.