Stubborn Corona v6 (4Gb Xbox 360E)

[Vampirtc]

I have a problem with this Xbox (not my first). After one or two glitches oscilator keeps "screaming" and Coolrunner stops glitching.
I have tried all Coolrunner firmwares, two different Coolrunners, even alternative Xell.

 

[Martin C]

Does the console still boot stock with those long R/W wires attached?

 

[Vampirtc]

Yes, stock works.

- - - Updated - - -

SK hynix...

 

[Martin C]

try a longer POST_OUT.

Don't mess with other xell versions. There is no need. the one in J-Runner works perfectly fine.

 

[Mazik]

Did you removed R1R1 ?

 

[playingmax]

just like mazik said "remove riri resister. n ur console should boot up.

 

[qalsan]

I have same issue, just want to ask you that, do i have to remove riri resister only in v6 or anyother corona models?

 

[bruno_rv]

I have never been successful in booting V6 with CR3 lite. I tried different chips,only TX Proto V1 and V2 booted v6 fine. I have genuine CR3 lite just for key extracting,for a long time, boots v1,v2,v3,v4,v5 ok but v6 never. With proto v1 and v2,no need to remove any resistor,boots in max 7-8 cycles if soldered bad. Of course,not talking about v6 with Winbond ram.

 

[kishanhs]

Version 6 corona won't Glitch
SK hynix... NAND 4 gb
Solution ?

 

[playingmax]

The new autogg will get ur console glitching

 

[kishanhs]

It glitch but still no xell

 

[kishanhs]

It had skhynix NAND