TRINITY Stubborn Trinity

O

Ohthatsnasty

Full Member
Dec 25, 2011
91
0
Melbourne, Australia
Basically i modded this trinity a week ago and it was insta booting 1st time everytime, fast forward a week and the customer says it is lucky to boot 1/5 times. I have been soldering and desoldering, flashing and dumping for the last 6 hours straight now and i have reached my limit. I have flashed stock nand back multiple times console boots instantly to factory dash.
http://imgur.com/gallery/fE9uD
Rater Log:
CR4 SelectedVersion: 10
Power Up
Waiting for POST to change
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Shutdown
 
O

Ohthatsnasty

Full Member
Dec 25, 2011
91
0
Melbourne, Australia
Wire looks exposed because i have desoldered and resoldered each connection at least 8 times :/ No damaged traces, i have tried alt cpu_rst, alt power, external power, shielded wire, unshielded wire, thick wire and thin wire. I have flicked more dip switches and jumped more jumpers than any man should ever have to. No xell, No freeboot no nothing.
 
O

Ohthatsnasty

Full Member
Dec 25, 2011
91
0
Melbourne, Australia
I also tried flashing stock nand and updating to 17489 and then dumping nand again to no avail.
===================================================
Sunday, November 1, 2015 2:57:34 AM


J-Runner v0.3 Beta (8) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Downloaded *xeBuild/17489/_glitch.ini
Downloaded *xeBuild/17489/_glitch2.ini
Downloaded *xeBuild/17489/_glitch2m.ini
Downloaded *xeBuild/17489/_jtag.ini
Finished Checking Files
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\mario\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 03
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\mario\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 2:48 min:sec


Reading Nand to C:\Users\mario\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 2:46 min:sec


Comparing...
Nands are the same
Load Files Initiliazation Finished
17489
Started Creation of the 17489 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.16.728
---------------------------------------------------------------
base path changed to C:\Users\mario\Desktop\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building glitch2 image


done! fsroot found ok!
---------------------------------------------------------------
C:\Users\mario\Desktop\J-Runner v3 (5) Core Pack\005849212008\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17489.0
Console : Trinity
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 005849212008
ConsoleId : 014494165969
MoboSerial: 9948752103491188
Mfg Date : 05/09/2011
CPU Key : A3FD4033ABACA253A1C2B166DB79C74D
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : B102348CB9B58BC1B8ECC1F5745CE2DC
CF LDV : 4
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\mario\Desktop\J-Runner v3 (5) Core Pack\005849212008
Image is Ready
Initializing updflash.bin..
Trinity
Nand Initialization Finished
CR4 Selected
Load Files Initiliazation Finished
17489
Started Creation of the 17489 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.16.728
---------------------------------------------------------------
base path changed to C:\Users\mario\Desktop\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building glitch2 image


done! fsroot found ok!
---------------------------------------------------------------
C:\Users\mario\Desktop\J-Runner v3 (5) Core Pack\005849212008\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17489.0
Console : Trinity
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 005849212008
ConsoleId : 014494165969
MoboSerial: 9948752103491188
Mfg Date : 05/09/2011
CPU Key : A3FD4033ABACA253A1C2B166DB79C74D
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : B102348CB9B58BC1B8ECC1F5745CE2DC
CF LDV : 4
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\mario\Desktop\J-Runner v3 (5) Core Pack\005849212008
Image is Ready
Initializing updflash.bin..
Trinity
Nand Initialization Finished
Version: 03
Flash Config: 0x00023010
Writing Nand
updflash.bin
Done!
in 1:51 min:sec


Checking Console..
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9188
Trinity
 
Titanfreak736

Titanfreak736

BANNED
Oct 19, 2014
194
0
yea that postout pad is ripped its not even connected to anything, you shouldn't be selling rghs if that is your soldering skills btw
 
  • Like
Reactions: DELETED
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
I dont even wnat to know how you ripped out almost 50% of the postout pads!

Pack it into a box, ship it to nofelonie, and he can use a postfix to salvage that console before it's too late.
 
  • Like
Reactions: DELETED
1

15432

VIP Member
Nov 14, 2010
703
68
Russia
according to the log, post_out is fine. (but soldering is still ugly)

how you ripped out almost 50% of the postout pads
Click to expand...
looks like there was a post_out QSB...
 
Last edited:
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
The was a post_out before the QSB too lol
 
O

Ohthatsnasty

Full Member
Dec 25, 2011
91
0
Melbourne, Australia
Like I've said this is how I received the xbox, I asked the customer when I first opened it if they had tried to mod it themselves they told me no and said they purchased it second hand because they were told that the trinitys were easier to mod. I dumped the nand, installed the cr4 and the console was booting under 15 seconds every single time at which point I handed the console over to the customer and they were happy with the results. 5 days later I get a call stating that the console does not boot anymore. Now if you could kindly refrain from insulting me and my soldering skills and help me with the problem at hand that would be very much appreciated.
 
Titanfreak736

Titanfreak736

BANNED
Oct 19, 2014
194
0
Ohthatsnasty said:
Like I've said this is how I received the xbox, I asked the customer when I first opened it if they had tried to mod it themselves they told me no and said they purchased it second hand because they were told that the trinitys were easier to mod. I dumped the nand, installed the cr4 and the console was booting under 15 seconds every single time at which point I handed the console over to the customer and they were happy with the results. 5 days later I get a call stating that the console does not boot anymore. Now if you could kindly refrain from insulting me and my soldering skills and help me with the problem at hand that would be very much appreciated.
Click to expand...
ok here it is
5volt=Looks good
Ground=Looks good
Postout=God Awful not even connected as the pad is burned time to get a post fix adapter
Cpu RST=Cant tell as the xclamps are in the way
E= looks good
K=Wires need to be a little shorter the leads are too long it risks a a short
Dont forget to replace thermal paste as well, Its only proffesional:smile:to do so as well as better temperatures
 
O

Ohthatsnasty

Full Member
Dec 25, 2011
91
0
Melbourne, Australia
I just wanted to thank everyone for there help, I will no longer be trying to rgh this console as i have found the reason for the intermittent glitching. The idiot before me knocked off a couple of resistors.


- - - Updated - - -

I just wanted to thank everyone for there help, I will no longer be trying to rgh this console as i have found the reason for the intermittent glitching. The idiot before me knocked off a couple of resistors.
 
1

15432

VIP Member
Nov 14, 2010
703
68
Russia
those capacitors aren't really vital.

can you build the retail image and try it?
 
O

Ohthatsnasty

Full Member
Dec 25, 2011
91
0
Melbourne, Australia
I've said it multiple times know, The console boots retail and cn go on live. It will not boot freeboot or xell, i have given up i am refunding the customer the cost of the cr4 and am washing my hands of this nonsense.
 
  • Like
Reactions: DELETED
Titanfreak736

Titanfreak736

BANNED
Oct 19, 2014
194
0
Ohthatsnasty said:
I've said it multiple times know, The console boots retail and cn go on live. It will not boot freeboot or xell, i have given up i am refunding the customer the cost of the cr4 and am washing my hands of this nonsense.
Click to expand...
next time dont make a thread about something very obvious, any pro would see that that post out is not even connected not to mention to thoroughly inspect the motherboard as well and please dont be rude to 15432 he is a god to the xbox 360 modding world, and he tried to help and you were a jerk.
 
Last edited:
  • Like
Reactions: briggs01
You must log in or register to reply here.